TLIB3113 — Diagnose and rectify minor faults on motive power units and rolling stock

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIB3113 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIB3113 must cover

29 assessable components: 3 elements (12 performance criteria), 9 performance evidence and 8 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Identify maintenance and repair requirements

1.1Hazards are identified, risks are assessed and risk control measures are implemented
1.2Condition of rolling stock and/or motive power unit ancillary equipment is assessed
1.3Faulty or damaged components or equipment are identified and assessed for component exchange or minor repair
1.4Equipment and tools required are identified and obtained
1.5Equipment is prepared and work areas are checked to ensure maintenance, repair and component exchange activities are carried out in a safe environment
1.6Faulty or damaged components or equipment that are not able to be repaired or exchanged are reported for further maintenance in accordance with workplace procedures

2 Conduct minor maintenance and routine repairs

2.1Minor maintenance, routine repairs and component exchange are carried out in accordance with manufacturer specifications and workplace procedures
2.2Equipment, tools and materials required are operated, applied and handled in accordance with work health and safety (WHS)/occupational health and safety (OHS) requirements and manufacturer specifications to prevent injury and damage

3 Check and report minor maintenance and repairs

3.1Minor maintenance, repairs and component exchange activities are checked for compliance with safety requirements and workplace procedures
3.2Equipment is checked to confirm it has been restored to operational standards
3.3Maintenance, repair and component exchange activities are documented and filed in accordance with workplace procedures and regulatory requirements
3.4Work area is checked for cleanliness and operational safety

Performance evidence

carrying out checks on different types of motive power units and rolling stock
carrying out minor maintenance, repair and component exchange activities correctly
completing relevant documentation
identifying job hazards and taking required actions to minimise, control or eliminate identified hazards
identifying possible faults and defects and appropriate corrective measures
modifying activities depending on operational contingencies, risk situations and environments
operating and adapting to different tools and equipment
reading and interpreting relevant instructions, procedures, information and signs
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

emergency response procedures
equipment used when diagnosing and rectifying minor faults and the procedures and precautions for their care, use and storage
relevant sections of applicable state/territory legislated rail safety requirements, codes of practice and/or guidelines, and system of safeworking requirements including:
work health and safety (WHS)/occupational health and safety (OHS) and environmental protection requirements
typical minor repair problems that can occur, and related actions that should be taken in accordance with workplace procedures
workplace component and material supply system
workplace documentation and records requirements
workplace procedures and policies for diagnosing and rectifying minor faults

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIB3113

What does an assessment tool for TLIB3113 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIB3113 needs to address all 29 unit components: 3 elements with 12 performance criteria, 9 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIB3113?

Auditori pulls the current release of TLIB3113 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIB3113 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIB3113 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIB3113, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIB3113 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIB3113 free