SIFEMWK016Treat complex ante mortem cases

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Every new account includes a free credit — no card, no subscription.

What an assessment for SIFEMWK016 must cover

70 assessable components: 6 elements (36 performance criteria), 5 performance evidence and 26 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to treat complex cases of ante mortem complications.

  • 1.1Prepare and use personal protective equipment.
  • 1.2Prepare mortuary area and appropriate mortuary instruments and equipment.
  • 1.3Conduct case analysis to identify type of condition through physical examination of the deceased person.
  • 1.4Liaise with funeral staff and family, where appropriate, about the possible outcome of the treatment for viewing purposes.

2 Treat bariatric deceased person.

  • 2.1Determine if assistance is required to move deceased.
  • 2.2Establish best positioning for the embalming procedure.
  • 2.3Confirm appropriate primary injection site.
  • 2.4Determine specific chemicals required including strength and volume.
  • 2.5Recognise and manage hazards, complications and problems.

3 Treat deceased persons with emaciation.

  • 3.1Cleanse and disinfect the body.
  • 3.2Check skin for skin slip and durability.
  • 3.3Identify extent of emaciation.
  • 3.4Confirm appropriate primary injection site.
  • 3.5Determine specific chemicals required including strength and volume.
  • 3.6Identify hypodermic injection sites for areas requiring feature building.
  • 3.7Recognise and manage hazards, complications and problems.

4 Treat deceased persons with jaundice.

  • 4.1Check whites of eyes for jaundice.
  • 4.2Cleanse and disinfect the body.
  • 4.3Check skin for skin slip and durability.
  • 4.4Identify extent of jaundice condition in relation to bilirubin/biliverdin conversion.
  • 4.5Confirm appropriate primary injection site.
  • 4.6Determine specific chemicals required including strength and volume.
  • 4.7Recognise and manage hazards, complications and problems.

5 Treat deceased persons with oedema.

  • 5.1Cleanse and disinfect the body.
  • 5.2Check skin for skin slip and durability.
  • 5.3Identify type, location and extent of oedema through physical examination of the deceased person’s skin.
  • 5.4Confirm appropriate primary injection site.
  • 5.5Determine specific chemicals required including strength and volume.
  • 5.6Use elevation or other techniques to reduce swelling.
  • 5.7Check for leakage areas.
  • 5.8Identify and manage hazards, complications and problems.

6 Complete documentation and clean instruments, equipment and mortuary area.

  • 6.1Complete case analysis report including reference to any complications that occurred during treatment and corrective actions taken.
  • 6.2Clean, disinfect or sterilise instruments and equipment.
  • 6.3Dispose of waste materials as appropriate.
  • 6.4Store instruments and equipment and report faults.
  • 6.5Clean and disinfect mortuary area.

Performance evidence

  • identify treatment requirements through a pre-embalming case analysis and treat complex cases of ante mortem complications using correct techniques and following work health and safety/occupational health and safety and infection control practices
  • prepare mortuary area and select and use the required instruments and equipment
  • clean, disinfect and sterilise the mortuary area, instruments and equipment at conclusion of the treatment
  • complete the case analysis report
  • Evidence of performance of treating two or more complex ante mortem cases is required to demonstrate consistency of performance and ability to respond to different situations.

Knowledge evidence

  • requirements for preparing the mortuary facility
  • mortuary equipment, instruments and materials and associated uses
  • cause and effect of people who have died of infectious and other diseases or complications and the embalming implications of these conditions
  • specific body examination techniques for oedema
  • case specific chemicals, strengths and volume
  • properties of cauterising agents
  • anatomical and linear guides for selected arteries raised
  • hypodermic insertion procedures for emaciated cases
  • hazards, complications and problems that may be associated with treating complex cases of ante mortem complications, including but not restricted to:
  • sharps injuries
  • needle stick injuries
  • blood splash
  • infection
  • chemical spill
  • wet area
  • application of standard precautions, including
  • use of personal protective equipment
  • presumption that all blood and body fluids are infectious
  • covering exposed cuts and abrasions, particularly on workers’ hands, with waterproof coverings prior to commencement of work
  • immediate treatment of puncture wounds or abrasions
  • funeral services industry parameters and protocols for dealing with the deceased, including social, cultural and religious considerations
  • federal, state or territory, and local government legislation and regulations in relevant to work health and safety/occupational health and safety, infection control and handling human remains
  • environmental impacts regarding embalming procedures and minimal impact practices to reduce these
  • correct and environmentally sound disposal methods for all types of waste and in particular for hazardous substances
  • workplace policies and procedures in relation to treating tissue gas
  • funeral services industry parameters and protocols for dealing with the deceased, including social cultural and religious considerations.

Foundation skills

  • Learning skills: to identify and assess a variety of complex cases of ante mortem complications.
  • Reading skills: to interpret work health and safety and infection control legislation.
  • Numeracy skills: to calculate ratio for disinfecting instruments and equipment.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing SIFEMWK016

What does an assessment tool for SIFEMWK016 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for SIFEMWK016 needs to address all 70 unit components: 6 elements with 36 performance criteria, 5 performance evidence requirements, 26 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for SIFEMWK016?

Auditori pulls the current release of SIFEMWK016 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for SIFEMWK016 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing SIFEMWK016 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of SIFEMWK016, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your SIFEMWK016 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate SIFEMWK016 free