RIIWSV304D — Prepare well servicing fishing operations
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for RIIWSV304D must cover
47 assessable components: 5 elements (21 performance criteria), 11 performance evidence and 14 knowledge evidence requirements, plus 1 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare for well servicing fishing operation
- 1.1Access, interpret and apply compliance documentation relevant to the control of oils and gas emergencies and critical situations and ensure the work activity is compliant
- 1.2Obtain, read, confirm and apply work instructions for the allocated task
- 1.3Identify, manage and report all potential hazards
- 1.4Resolve coordination requirements with others at the site prior to commencing and during work activities
2 Prepare pumping and fluid systems
- 2.1Set required pressure in relief valve to parameters
- 2.2Prepare fluid to required volume
- 2.3Prepare fluid to required properties
- 2.4Record accurate current volumes
- 2.5Ensure correct flow path (flow back to tank, flow to shaker, flow to pit, flow to flare line)
3 Monitor and maintain pressures
- 3.1Conduct visual gauge inspections
- 3.2Record well pressure
- 3.3Document and record gauge reading where instructed by RM/Driller
- 3.4Clarify required actions for overpressure or under pressure
4 Monitor and maintain flow paths
- 4.1Clarify required actions for overpressure or under pressure
- 4.2Recognise factors that may contribute to overpressure or under pressure
- 4.3React accordingly to identified overpressure or under pressure
- 4.4Notify driller of abnormal operating condition
5 Monitor and maintain well control
- 5.1Review pressures to ensure accurate
- 5.2Observe fluid levels (increase/loss)
- 5.3Realign flow lines to top up hole
- 5.4Maintain fluid level in the hole
Performance evidence
- locates and applies relevant documentation, policies and procedures
- works effectively with others to undertake and complete preparation for well servicing fishing operations that meets all of the required outcomes including:
- complying with written and verbal reporting requirements and procedures
- communicating clearly and concisely with others to receive and clarify work instructions
- communicating clearly and concisely with others to resolve coordination requirements throughout work activities
- demonstrates completion of preparing for well servicing fishing operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
- confirming and setting required pressure in relief valves
- preparing fluids to required volume and properties
- confirming correct flow path is set
- identifying and confirming actions for over/under pressure
- monitoring fluid levels and flow lines
Knowledge evidence
- different techniques fishing
- pump operations
- volumes of fluids
- circulating systems
- convert metric to imperial and imperial to metric.
- types of equipment being used
- basic understanding of the process of fishing and the functionality of the various types of equipment used.
- components of individual fishing tools.
- well bore conditions
- causes of hang-ups
- hole volumes (pipe displacement, tubing volume)
- tripping speed
- over pull weights
- tubing/rods specifications
Foundation skills
- Foundation Skills: Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing RIIWSV304D
What does an assessment tool for RIIWSV304D need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIIWSV304D needs to address all 47 unit components: 5 elements with 21 performance criteria, 11 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for RIIWSV304D?
Auditori pulls the current release of RIIWSV304D from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIIWSV304D — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing RIIWSV304D assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIIWSV304D, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- RIIWSV203E — Prepare equipment for well servicing air operations
- RIIWSV301F — Conduct and maintain well servicing derrick operations
- RIIWSV302E — Trip production string for well servicing operations
- RIIWSV303E — Operate fluid systems
- RIIWSV304E — Prepare well servicing fishing operations
- RIIWSV401E — Rig up and rig down for well servicing operations
- RIIWSV402D — Conduct well servicing milling operations
- RIIWSV403E — Participate in well servicing nippling-up and pressure test
- RIIWSV404D — Conduct fishing operations
- RIIWSV501D — Manage well servicing induction and orientation
- RIIWSV502E — Manage well completion and rig release
- RIIWSV503E — Manage and monitor rig-up operations
Your RIIWSV304D assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate RIIWSV304D free