RIICRC302E — Place and form concrete kerb, channel and fixtures
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for RIICRC302E must cover
75 assessable components: 8 elements (29 performance criteria), 22 performance evidence and 22 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1. Plan and prepare to place and form concrete kerb, channel and fixtures
- 1.1Obtain, interpret, clarify and confirm work requirements
- 1.2Access, interpret and apply documentation required to place and form concrete kerb, channel and fixtures and confirm work activity is compliant
- 1.3Identify and address potential risks, hazards and environmental issues, and implement control measures
- 1.4Select and wear personal protective equipment according to site requirements
2. Set out and prepare for construction or installation
- 2.1Identify and protect existing services from damage according to site requirements
- 2.2Set out location of kerb, channel and/or fixtures to dimensions according to job requirements or to pre-set pegs
- 2.3Set out driveways and other required inverts
- 2.4Check grades and confirm specified fall according to job requirements
- 2.5Construct formwork and check and confirm against job requirements
- 2.6Complete services and conduit preparation according to site requirements
3. Form kerb and barrier strips
- 3.1Place concrete to string line and maintain vertical and horizontal alignment
- 3.2Maintain concrete according to job requirements
- 3.3Mix and apply mortar at quality and quantity to achieve specified finish according to job requirements
4. Pour concrete to installed formwork
- 4.1Place and compact concrete into formwork
- 4.2Finish surface to specified alignment according to job requirements
- 4.3Remove face formwork without damage to concrete
5. Finish kerbs, channels and fixtures
- 5.1Finish job to shape according to job requirements
- 5.2Finish concrete to specified quality and texture according to job requirements
- 5.3Position expansion, construction and dowel joints according to job requirements
- 5.4Cure and protect finished work
6. Install pre-cast concrete units
- 6.1Prepare base section and finish for pre-cast unit installation according to job requirements
- 6.2Install and join pre-cast concrete units according to job requirements
7. Repair kerb, gutters and median and barrier strips
- 7.1Identify damaged areas, assess repair requirements and remove or repair damaged section according to job requirements
- 7.2Set up formwork or slip form machine and use to replace removed section according to job requirements
- 7.3Place concrete to alignment using concrete to specified mix according to job requirements
- 7.4Finish concrete to specification and match kerb shape of kerb or gutter in place according to job requirements
- 7.5Clear, backfill and finish area according to site requirements
8. Conduct clean-up activities
- 8.1Clear work area and dispose of or recycle materials according to site requirements
- 8.2Clean, maintain, check and store tools and equipment according to manufacturer specifications and site requirements
Performance evidence
- place and form concrete kerb, channel and fixtures on at least two occasions, including:
- setting out and preparing for construction or installation according to drawings and specifications requirements
- forming kerb and barrier strips by placing concrete and applying mortar to specifications
- pouring concrete into installed formwork
- finishing kerbs, channels and fixtures
- installing pre-cast concrete units and finishing to specifications
- repairing kerb, gutters and median and barrier strips
- clearing, backfilling and finishing work areas
- clearing work area and disposing of, recycling or storing materials.
- During the above, the candidate must:
- locate and apply required documentation, policies and procedures and confirm work activity is compliant
- implement the requirements, procedures and techniques to place and form concrete kerbs, channels and fixtures, including:
- identifying and applying relevant drawings and job specifications to all work activities
- identifying, addressing and reporting potential hazards and risks
- identifying, obtaining, confirming and implementing signage requirements
- selecting and checking for faults all plant, tools and equipment required to carry out tasks
- identifying, addressing and reporting environmental issues and ground conditions
- work with others to place and form concrete kerbs, channels and fixtures in a way that meets required outcomes, including:
- preparing for and organising work activities to meet task requirements
- communicating with others to receive and clarify work instructions
- using communication techniques and aids to advise others of work activity and exclusion zones
- monitoring hazards and identifying and communicating changes to work environment.
Knowledge evidence
- legislation required to place and form concrete kerb, channel and fixtures
- policies, procedures and documentation required to place and form concrete kerb, channel and fixtures, including those relating to:
- Australian Standards required for kerbs, channels and fixtures
- site requirements
- manufacturer specifications for required plant and equipment
- relevant drawings and job specifications
- hazard and risk management
- environmental protection and ground conditions
- work activity set up procedures
- project quality requirements
- communication techniques and aids
- site isolation and traffic control responsibilities
- work health and safety
- waste management
- types, characteristics, technical capabilities and limitations of equipment required to place and form concrete kerb, channel and fixtures
- principles and techniques for effective concrete kerb, channel and fixtures placement and formation, including:
- gutters
- median and barrier strips
- driveways
- inverts
- techniques for installing formwork
- kerb, channel and fixture repair techniques.
Foundation skills
- Numeracy: Calculates basic measurements including mass and dimensions
- Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing RIICRC302E
What does an assessment tool for RIICRC302E need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICRC302E needs to address all 75 unit components: 8 elements with 29 performance criteria, 22 performance evidence requirements, 22 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for RIICRC302E?
Auditori pulls the current release of RIICRC302E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICRC302E — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing RIICRC302E assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICRC302E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- RIICRC201E — Repair potholes
- RIICRC202E — Install signs
- RIICRC203E — Install sub-soil drainage
- RIICRC204E — Install and maintain roadside fixtures
- RIICRC205E — Install utility poles
- RIICRC206E — Install pre-cast concrete crash barriers
- RIICRC207E — Install noise barriers
- RIICRC208E — Lay pipes
- RIICRC209E — Lay reinforced concrete box culverts
- RIICRC301E — Maintain drainage systems
- RIICRC303E — Lay pavers
- RIICRC304E — Maintain sealed roads
Your RIICRC302E assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate RIICRC302E free