PUAFIR306 — Identify, detect and monitor hazardous materials at an incident
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for PUAFIR306 must cover
76 assessable components: 5 elements (24 performance criteria), 21 performance evidence and 31 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Assess hazardous materials incident
- 1.1Hazardous materials incident is approached using care and caution and a safe distance is maintained, in accordance with organisational procedures and advice from appropriate authorities
- 1.2Hazardous materials are identified from a safe distance and information is conveyed through the chain of command, in accordance with organisational procedures
- 1.3Information sources are accessed to determine potential behaviour of hazardous materials, in accordance with organisational procedures
2 Identify and assess hazards at incident
- 2.1Site hazards are identified, in accordance with organisational procedures
- 2.2Specific hazards relating to materials and containers are identified, in accordance with organisational procedures
- 2.3Relevant hazard information is incorporated into detection strategy
- 2.4Hazards are assessed, in accordance with organisational procedures, and information is conveyed through the chain of command
3 Develop an entry plan
- 3.1Entry plan objectives are identified and conveyed through the chain of command
- 3.2Entry plan is developed, in accordance with organisational procedures
- 3.3Appropriate detection equipment is assessed and selected, in accordance with organisational procedures
- 3.4Personal protective clothing and equipment is identified, selected and checked, in accordance with organisational policies, procedures and response situation
- 3.5Hazard control zones are established, in accordance with organisational procedures
- 3.6Decontamination procedures are identified
- 3.7Organisations required to assist with the operation are determined and documented
- 3.8Detection strategy is documented, in accordance with organisational procedures
4 Implement entry plan
- 4.1Entry plan is implemented in accordance with organisational procedures
- 4.2Detection equipment is prepared for use, in accordance with organisational procedures
- 4.3Detection equipment is used and maintained, in accordance with organisational procedures
- 4.4Personal protective clothing and personal protective equipment is donned and operated, in accordance with organisational policies and procedures
- 4.5Results are recorded and reported, in accordance with organisational procedures
- 4.6Upon leaving area of operations, decontamination procedures are undertaken, in accordance with organisational procedures
5 Review entry plan
- 5.1Entry plan is reviewed and safety of entry team is monitored, in accordance with organisational procedures
- 5.2Contamination incidents are recorded and reported to appropriate personnel, in accordance with organisational procedures
- 5.3Entry plan is reviewed and documentation is completed, in accordance with organisational procedures
Performance evidence
- analysing and communicating detection results
- applying Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) organisational requirements
- assessing hazardous materials at an incident
- collecting and interpreting safety and hazard information
- complying with legislation
- demonstrating safe working practices
- developing, implementing and reviewing an entry plan
- donning and operating in, decontaminating and removing in personal protective clothing and equipment
- establishing control zones
- identifying and assessing hazards at an incident including implementing hazardous control zones
- identifying hazardous materials
- identifying, selecting, checking, testing and maintaining personal protective clothing and equipment for a range of hazardous materials
- implementing decontamination procedures
- implementing organisational procedures and operating guidelines
- interpreting hazardous conditions using detection equipment
- maintaining monitoring equipment
- operating breathing apparatus
- recommending appropriate actions when identifying, detecting and monitoring materials
- recording and interpreting data
- reviewing entry plan
- selecting, operating and interpreting detection equipment
Knowledge evidence
- apparatus (breathing) maintenance and procedures
- asphyxiates including simple, chemical, flammable gases and liquids
- basic chemistry concepts
- conditions under which atmospheres become hazardous
- decontamination procedures and types of decontamination including decontamination areas including holding, wash, disrobing and rest, decontamination plan and corridor, decontamination techniques including emergency, emergency mass and technical decontamination
- detection strategies applied for decontamination
- dynamic risk assessments
- dynamics of toxicity, corrosivity and flammability
- effects on humans exposed to commonly encountered atmospheric contaminants such as reaction products, combustion products and variable oxygen concentrations
- entry plans
- flammable range
- identification of hazardous materials
- information sources
- legislation relevant to organisation
- local and systemic effects of industrial toxins
- main routes for entry of toxins into the human body
- odour threshold including exposure standards including time weighted average, short term exposure limits and peak limitation values and Immediate Danger to Life and Health (IDLH) which may include Acute Exposure Guideline Levels (AEGL)
- organisational documentation, policies and procedures including those of government
- personal protective clothing and equipment use and limitations for a range of hazardous materials
- physical and chemical properties
- potential behaviour of hazardous materials including corrosivity, entry routes of toxins, flammability, toxicity, vapour density and pressure
- procedures for establishment, maintenance and review of control zones including entry plans and decontamination
- response situations
- roles and responsibilities of other agencies
- support organisations required to assist
- types of hazards including chemical, biological and radiological, physical, electrical, mechanical, thermal, visual, environment and dangerous situations and pressure vessels and lines
- types of hazard control zones including area of likely contamination (hot zone), area of operations (warm zone), controlled exits, entrances, refuges and emergency exits, criteria applied to determine the extent of hazardous areas, support zone (cold zone)
- units of measurement used to express concentration of atmospheric contaminants (mg/cubic m, ppm, % and v/v)
- upper and lower flammable limits
- use and limitations of workplace exposure standards
- Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) organisational requirements including risk mitigation
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing PUAFIR306
What does an assessment tool for PUAFIR306 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PUAFIR306 needs to address all 76 unit components: 5 elements with 24 performance criteria, 21 performance evidence requirements, 31 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for PUAFIR306?
Auditori pulls the current release of PUAFIR306 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PUAFIR306 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing PUAFIR306 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PUAFIR306, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- PUAFIR001 — Coordinate state aerial operations
- PUAFIR002 — Manage aviation resources for an incident
- PUAFIR003 — Manage aviation support operations at air base
- PUAFIR004 — Manage complex aerial operations for an incident
- PUAFIR005 — Observe fire from an aircraft
- PUAFIR006 — Observe non-fire incident from an aircraft
- PUAFIR007 — Operate aerial drip torch
- PUAFIR008 — Operate aerial ignition equipment in an aircraft
- PUAFIR009 — Operate airborne intelligence system
- PUAFIR010 — Operate small equipment to prepare and load product into aircraft
- PUAFIR011 — Operate state air desk
- PUAFIR012 — Supervise aerial firefighting operations
Your PUAFIR306 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate PUAFIR306 free