PMASMELT267 — Cast ingots

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate PMASMELT267 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for PMASMELT267 must cover

39 assessable components: 4 elements (22 performance criteria), 10 performance evidence and 7 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare for operations

1.1Interpret and confirm work requirements before proceeding
1.2Identify and control hazards
1.3Ensure appropriate authorisations have been obtained/issued
1.4Identify work flow path blockages (interruptions or bottlenecks)

2 Conduct pre-start requirements to procedures

2.1Conduct routine pre-start equipment checks
2.2Conduct isolation as required for pre-start inspections
2.3Prepare equipment for operation
2.4Complete routine equipment checklists
2.5Complete reports as required for equipment inspections

3 Conduct aluminium casting operations to procedures

3.1Start up equipment as required
3.2Monitor equipment operation and check operational variables are within parameters
3.3Verify equipment performance throughout the process
3.4Adjust equipment/variables in accordance with procedures
3.5Apply operating principles to identify problems and take action
3.6Shut down equipment as required
3.7Conduct routine housekeeping activities
3.8Recognise and respond to emergencies should one arise
3.9Complete records as required for equipment operation and performance

4 Isolate and de-isolate plant

4.1Isolate plant
4.2Make safe for required work
4.3Check plant is ready to be returned to service
4.4De-isolate and prepare plant for return to service

Performance evidence

pour molten aluminium from the holding furnace to delivery launders
operate and monitor the casting equipment and ancillary equipment
stack and strap ingots as required
monitor equipment conditions and maintenance requirements and take action
monitor process parameters and performance and make adjustments according to procedures
recognise early warning signs of equipment/processes needing attention or with potential problems and take action to ensure a timely return to full performance
isolate and de-isolate equipment
identify hazards and apply hazard control procedures
respond to emergencies
apply housekeeping procedures, including cleaning the area, removal of contaminants, safety inspections and rectification of issues that could compromise safety.

Knowledge evidence

all items on a schematic of the metal delivery, casting and ingot stacking equipment and the function of each
basic principles of operation of main equipment items, including metal delivery, casting and ingot stacking equipment
basic understanding of the product specifications and variations required on the input and output side
process parameters and limits (e.g. temperature)
emergency responses, including those related to: • leak/loss of containment • evacuation due to fire or open cell circuit • loss of power • excessive emissions of fumes or particulate • major oil spill • equipment failure
typical hazards associated with heat, electricity, hydraulics and pneumatics and high pressure piping and valves, pinch and crush points on conveyor systems, mobile equipment, hazardous materials, banned items, suspended loads and hydration and heat stress, and how to recognise them
correct use of personal protective equipment (PPE), including specific insulated boots, heat resistant material, full-ventilated suits, full-face masks and other situation-specific equipment.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing PMASMELT267

What does an assessment tool for PMASMELT267 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PMASMELT267 needs to address all 39 unit components: 4 elements with 22 performance criteria, 10 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for PMASMELT267?

Auditori pulls the current release of PMASMELT267 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PMASMELT267 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing PMASMELT267 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PMASMELT267, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your PMASMELT267 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate PMASMELT267 free