MSMRV391 — Diagnose recreational vehicle electrical faults

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MSMRV391 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MSMRV391 must cover

39 assessable components: 3 elements (13 performance criteria), 1 performance evidence and 25 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Identify fault

1.1Identify job requirements from workplace instructions
1.2Communicate with the customer and relevant other people to find out about the fault, its frequency, the customer’s operating practices and any issues with related equipment
1.3Check the service history to verify the manufacturer’s maintenance and service requirements have been met
1.4Identify hazards and hazard controls and check the hazard controls are in place and operating
1.5Conduct a visual inspection to identify possible causes of the fault according to workplace procedures

2 Perform diagnostic tests

2.1Identify relevant diagnostic tests according to workplace procedures
2.2Select and check tools and equipment for relevant diagnostic tests are ready to use
2.3Confirm test procedures with appropriate personnel as required, and obtain any necessary permissions to conduct tests
2.4Carry out diagnostic tests according to workplace procedures
2.5Identify possible causes of the fault from diagnostic test results

3 Document faults and proposed solutions

3.1Record information about the fault and test results according to workplace procedures
3.2Identify proposed solutions to rectify faults based on information found
3.3Communicate findings to the workplace supervisor and customer and confirm the next steps

Performance evidence

There must be evidence that the candidate has completed the tasks set out in the elements and performance criteria and has demonstrated the ability to diagnose recreational vehicle electrical faults on at least three occasions.

Knowledge evidence

requirements relevant to the performance criteria of:
AS/NZS 5601.2 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
AS/NZS 3001 Electrical installations - Transportable structures and vehicles including their site supplies
the Road Vehicle Standards Act 2018
Australian design rules
types of technical information relevant to diagnosing electrical faults in recreational vehicles and how to interpret that information
manufacturer’s instructions (including for installation, use, service, troubleshooting and repair) for and commonly reported electrical faults with:
vehicle, solar and 240 V charging systems
appliances including refrigerators, lights and air-conditioners
solar panels
batteries including lithium, absorbed glass mat, gel cell and wet cell batteries
fridges
Bluetooth and wi-fi systems
slide-out systems
diagnostic tests for commonly reported electrical faults in recreational vehicles, including the applicability and use of remote diagnostics technology
which tools and equipment to use when diagnosing electrical faults in recreational vehicles
workplace policies and procedures relevant to their job role and responsibilities including for:
diagnosing electrical faults in recreational vehicles
communication and reporting
quality assurance
work health and safety, including personal protective equipment
work planning
hazards that might arise in the work environment and their controls
the most common issues that can arise when diagnosing recreational vehicle electrical faults and how to avoid and respond to them
how to identify if an electrical fault has been diagnosed correctly in a recreational vehicle.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MSMRV391

What does an assessment tool for MSMRV391 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSMRV391 needs to address all 39 unit components: 3 elements with 13 performance criteria, 1 performance evidence requirements, 25 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MSMRV391?

Auditori pulls the current release of MSMRV391 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSMRV391 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MSMRV391 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSMRV391, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MSMRV391 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MSMRV391 free