MSMRV380 — Build towable recreational vehicle chassis

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MSMRV380 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MSMRV380 must cover

37 assessable components: 4 elements (19 performance criteria), 1 performance evidence and 17 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to build chassis

1.1Identify chassis building requirements from job and manufacturer’s instructions
1.2Select and check all required tools and equipment are ready to use
1.3Gather chassis, suspension, braking system and other items required by job specifications, and check they meet quality requirements
1.4Identify hazards and hazard controls and check the hazard controls are in place and operating

2 Fabricate chassis

2.1Assemble and align chassis components in the jig
2.2Weld the chassis according to workplace procedures
2.3Fit the vehicle identification number plate to the chassis
2.4Clean the chassis and prepare it for coating according to manufacturer’s instructions
2.5Select, mix and prepare coatings according to job instructions
2.6Apply coatings according to manufacturer’s instructions

3 Assemble and install suspension and braking systems

3.1Fit axles, hubs and rims onto the chassis according to the manufacturer’s instructions
3.2Assemble the suspension components and fit the suspension according to the manufacturer’s instructions
3.3Fit and tighten the wheels according to the manufacturer’s instructions
3.4Fit, wire and test the braking system according to the manufacturer’s instructions
3.5Check the chassis, suspension and braking system meet quality requirements and rectify any deficiencies

4 Complete the build according to workplace procedures

4.1Clean up the work area, identify items for recycling and dispose of waste
4.2Identify, tag and report any damage to equipment and tools
4.3Check, clean and do routine maintenance on equipment and tools and store them and unused materials
4.4Complete task outcome documentation

Performance evidence

There must be evidence that the candidate has completed the tasks set out in the elements and performance criteria and has demonstrated the ability to build at least three towable recreational vehicle chassis by fabricating them and assembling and installing their suspensions and braking systems.

Knowledge evidence

requirements relevant to the performance criteria of:
AS/NZS 5601.2 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
AS/NZS 3001 Electrical installations - Transportable structures and vehicles including their site supplies
the Road Vehicle Standards Act 2018
Australian design rules
types of towable recreational vehicle chassis, suspensions and braking systems and manufacturer’s installation and use instructions for them
which hand and power tools and equipment to use when building a towable recreational vehicle chassis
workplace policies and procedures relevant to their job role and responsibilities including for:
building towable recreational vehicle chassis
communication and reporting
environmental protection and sustainability, including adhesives, dust, noise and waste
quality assurance
work health and safety, including personal protective equipment
work planning
hazards that might arise in the work environment and their controls
the most common issues that can arise when building towable recreational vehicle chassis and how to avoid and respond to them
how to identify if a towable recreational vehicle chassis has been built correctly.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MSMRV380

What does an assessment tool for MSMRV380 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSMRV380 needs to address all 37 unit components: 4 elements with 19 performance criteria, 1 performance evidence requirements, 17 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MSMRV380?

Auditori pulls the current release of MSMRV380 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSMRV380 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MSMRV380 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSMRV380, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MSMRV380 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MSMRV380 free