MSFFM2018 — Operate basic static machines safely

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MSFFM2018 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MSFFM2018 must cover

51 assessable components: 3 elements (15 performance criteria), 10 performance evidence and 23 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for task

1.1Identify task requirements from work instructions
1.2Identify and follow work health and safety requirements
1.3Select material for machining based on job requirements and check that it meets task quality requirements
1.4Check that emergency stops, gauges, guards, controls and safety equipment are functional prior to machine start-up
1.5Complete machine settings and adjust to meet task requirements in compliance with manufacturer instructions
1.6Follow workplace procedures for machine start-up
1.7Complete trial run to check machine is operating correctly and report any problems to supervisor

2 Operate machines

2.1Feed material into machine in accordance with manufacturer instructions, safety requirements and workplace procedures
2.2Operate machine in accordance with its designed capacity and purpose, and to manufacturer recommendations
2.3Identify items that do not meet quality requirements and recycle or discard in accordance with workplace procedures
2.4Recognise problems with product or machine operation and report to appropriate persons in accordance with workplace procedures

3 Finalise task

3.1Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
3.2Clean machinery, complete routine maintenance and leave in a safe mode in accordance with workplace procedures
3.3Identify, tag and report faulty equipment in accordance with workplace procedures
3.4Complete task documentation in accordance with workplace procedures

Performance evidence

safely operate at least 5 of the following static machines on at least 2 occasions each to complete specified tasks to workplace quality standards:
band saw
crosscut saw
panel saw
rip saw
edge bander
hinge borer
thicknesser
jointer
wide belt sander.

Knowledge evidence

safety requirements and considerations for operation of static machines:
correct positioning of hands and body in relation to the machine
importance of grain direction in solid timber for the safe positioning of the work piece in the machine
correct use of machine guards and safety devices, including Australian Standards requirements
how to prevent kick back of work piece in the machine
required dust extraction for the materials being used
characteristics of static machines used in machining materials, including at least 5 of the following:
band saw
compound mitre saw/crosscut saw
panel saw
rip saw
edge bander
hinge borer
thicknesser
jointer
personal protective equipment (PPE) required for operation of static machines
characteristic of manufactured board and solid timber in response to machining
edge treatments
selecting the correct face on double sided flat panels for the finished situation
importance of using correct tooling for the machine and operation being performed
workplace procedures for:
quality assurance and tolerance levels
reporting of machinery faults and material defects.

Foundation skills

Reading skills: to interpret familiar workplace procedures.
Writing skills: to communicate simple information in familiar workplace documents.
Numeracy skills: to interpret work instructions associated with number or measurement.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MSFFM2018

What does an assessment tool for MSFFM2018 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSFFM2018 needs to address all 51 unit components: 3 elements with 15 performance criteria, 10 performance evidence requirements, 23 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MSFFM2018?

Auditori pulls the current release of MSFFM2018 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSFFM2018 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MSFFM2018 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSFFM2018, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MSFFM2018 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MSFFM2018 free