MSFFL3110 — Install adhesive-fixed carpet

1 Prepare to install adhesive-fixed carpet

• 1.1Interpret underlay and carpet installation requirements from job and manufacturer instructions and calculate the quantities of materials required
• 1.2Identify hazards relating to the work site, work practices, materials, tools and equipment, and check risk treatments are in place and operating
• 1.3Select and check all required tools and equipment are ready to use, and organise to fix any deficiencies according to workplace procedures
• 1.4Gather underlay, carpet, adhesives, trims and other materials required by job instructions, and check they meet quality requirements and are prepared and ready to install according to manufacturer instructions, product labels and safety data sheets
• 1.5Confirm the subfloor is clean and suitable for installing the carpet, and fix or report any deficiencies according to workplace procedures
• 1.6Apply primer to the subfloor according to the manufacturer instructions

2 Lay carpet using the direct-stick method

• 2.1Determine the set out and laying direction of the carpet according to job instructions to minimise waste and joins, consider the direction of the pile, and ensure an efficient, quality installation
• 2.2Establish the skirting point and seam placements for the carpet
• 2.3Lay out carpet pieces and measure, mark and check them for size, direction of the pile, pattern and match
• 2.4Fold back the carpet and apply adhesive to the subfloor according to the manufacturer instructions and workplace procedures
• 2.5Position, stretch and fasten the carpet into the adhesive, and seal and join the carpet pieces, according to the manufacturer instructions
• 2.6Trim off excess carpet, install finishing strips, and finish installing the carpet to meet quality requirements
• 2.7Check the carpet is installed correctly according to job instructions and quality requirements, and fix any deficiencies

3 Lay carpet using the dual-bond method

• 3.1Confirm the subfloor is clean and suitable for installing the carpet, and fix or report any deficiencies according to workplace procedures
• 3.2Apply primer to the subfloor according to the manufacturer instructions
• 3.3Establish the skirting point and seam placements for the underlay
• 3.4Lay out and trim the underlay according to job instructions
• 3.5Fold back the underlay and apply adhesive to the subfloor according to the manufacturer instructions, product labels, safety data sheets and workplace procedures
• 3.6Position and fasten the underlay into the adhesive and trim the underlay according to the manufacturer instructions and job instructions
• 3.7Establish the skirting point and seam placements for the carpet
• 3.8Lay out the carpet pieces and measure, mark and check them for size, direction of the pile, pattern and match
• 3.9Fold back the carpet and apply adhesive to the underlay according to the manufacturer instructions and workplace procedures
• 3.10Position, stretch and fasten the carpet into the adhesive, and seal and join the carpet pieces, according to the manufacturer instructions
• 3.11Trim off excess carpet, install finishing strips and finish installing the carpet to meet quality requirements
• 3.12Check the carpet is installed correctly according to job instructions and quality requirements, and fix any deficiencies

4 Complete the task according to workplace procedures

• 4.1Clean up the work area, identify items for recycling and dispose of waste
• 4.2Identify, tag and report any damage to equipment and tools
• 4.3Check, clean and do routine maintenance on equipment and tools and store them and unused materials
• 4.4Complete task outcome documentation

What does an assessment tool for MSFFL3110 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSFFL3110 needs to address all 38 unit components: 4 elements with 29 performance criteria, 3 performance evidence requirements, 6 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MSFFL3110?

Auditori pulls the current release of MSFFL3110 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSFFL3110 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MSFFL3110 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSFFL3110, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.