MEAAVI0037 — Test, align and troubleshoot aircraft synchro and servo system components

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEAAVI0037 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEAAVI0037 must cover

20 assessable components: 3 elements (8 performance criteria), 4 performance evidence and 5 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Test synchro and servo system components

1.1Prepare and connect synchro and servo system components to the appropriate test equipment or rig in accordance with standard enterprise procedures
1.2Perform functional testing on components, or cycle components through prescribed test procedures, for evidence of serviceability or malfunction in accordance with maintenance manual while observing all relevant work health and safety (WHS) requirements
1.3Identify and record faults or unserviceabilities in required maintenance documentation

2 Align synchro and servo system components

2.1Adjust synchro and servo system components until operating within prescribed limits or tolerances in accordance with maintenance manuals and standard enterprise procedures to meet specifications

3 Troubleshoot synchro and servo system components

3.1Use available information from maintenance records and inspection and test results to assist in fault determination
3.2Troubleshoot faults and unserviceabilities using maintenance manual fault diagnosis guides and logic processes
3.3Locate synchro and servo system component faults and identify and record causes of faults in required maintenance documentation
3.4Determine requirements for rectification of faults

Performance evidence

perform testing, alignment and troubleshooting on aircraft synchro and servo systems and components applicable to the enterprise, including at least one of the following: • air data computers • auto pilot servos • remote position indicators
recognise the serviceability state and repair requirements for each of the following: • synchro/servo system error detection devices • direct current (DC) and alternating current (AC) synchronous components • gyroscopic instruments (mechanical, electro-mechanical, vacuum/pressure types) • flight control servo devices
perform functional testing by applying logic processes to isolate synchro and servo system component faults
apply testing procedures, cleanliness requirements and safety precautions at all times, and as relevant to the system components being maintained.

Knowledge evidence

component and system operation
the basic function and operation of synchro and servo system components to enable testing for fault isolation or confirmation and to determine repair or overhaul requirements and serviceability status post-repair or overhaul
basic principles and functions relating to synchro and servo system components and associated with: • advanced analogue fundamentals • synchronous systems • gyroscopes
work health and safety (WHS) practices for aircraft synchro and servo systems
maintenance manuals for aircraft synchro and servo systems.

Foundation skills

Reading: Reading skills to interpret maintenance manuals, inspection procedures and specifications (allowable limits).
Writing: Writing skills to record and report on defects and faults and their causes.
Numeracy: Numeracy skills to interpret and communicate technical information.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEAAVI0037

What does an assessment tool for MEAAVI0037 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEAAVI0037 needs to address all 20 unit components: 3 elements with 8 performance criteria, 4 performance evidence requirements, 5 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEAAVI0037?

Auditori pulls the current release of MEAAVI0037 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEAAVI0037 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEAAVI0037 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEAAVI0037, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEAAVI0037 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEAAVI0037 free