ICTCBL320 — Jumper metallic conductor cable in the access network

1 Prepare cabinet and termination frame for jumpering

• 1.1Arrange access according to customer and individual worksite requirements
• 1.2Set up work site to ensure public safety and to comply with utility provider, local, state and commonwealth requirements
• 1.3Inspect site to develop work health and safety (WHS) plan and notify appropriate personnel of identified safety hazards
• 1.4Prepare for cable jumpering work observing client practices, cable type, termination systems, earthing and protection and relevant legislative requirements
• 1.5Select correct jumpering activities for installation according to client practices
• 1.6Identify remote power feeding services that operate at above telecommunications network voltage (TNV) and special services that terminate in the cabinet of housing
• 1.7Take necessary precautions to work safely with network voltages and minimise service disruption to special services
• 1.8Remove all contaminants from worksite that may adversely affect jumpering and prepare worksite to ensure adequate visibility to minimise errors and reduce eye strain
• 1.9Plan block locations following client practices within the frame and allow for capacity to expand jumpering where possible

2 Jumper terminal blocks on frame

• 2.1Install terminating modules to frame according to manufacturer’s specifications
• 2.2Set up jumpering reel near source terminal block and draw jumper through frame
• 2.3Terminate jumper to block and return, cut and terminate source end of jumper
• 2.4Identify and label jumpers according to client practices
• 2.5Install over-voltage protection devices to all cables with metallic component where required
• 2.6Earth cable shield to manufacturer’s specifications and industry standards

3 Test jumpering and seal closure

• 3.1Conduct visual inspection to confirm that jumper is not kinked or jammed
• 3.2Test termination to satisfy performance specifications and record results if required
• 3.3Close housing, seal and re-pressurise where necessary

4 Complete records and restore site

• 4.1Update records and plans accurately with cabling details according to industry codes of practice and current Australian standards
• 4.2Remove installation waste and debris from worksite and dispose of according to environmental requirements to maintain safe worksite conditions
• 4.3Notify appropriate personnel about completion of job and obtain sign off

What does an assessment tool for ICTCBL320 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICTCBL320 needs to address all 40 unit components: 4 elements with 21 performance criteria, 5 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for ICTCBL320?

Auditori pulls the current release of ICTCBL320 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICTCBL320 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing ICTCBL320 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICTCBL320, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.