ICPCBF297 — Clean sack and bag machines
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for ICPCBF297 must cover
22 assessable components: 3 elements (14 performance criteria), 1 performance evidence and 3 knowledge evidence requirements, plus 4 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare for cleaning
- 1.1Machinery is safely switched off before cleaning is started
- 1.2Cleaning equipment and materials most suitable for the machine are selected
2 Commence cleaning
- 2.1Vacuum systems are checked for wear, opened and cleaned with compressed air, and suctions replaced if necessary
- 2.2Rollers and drums are checked for wear and cleaned
- 2.3Jaws and grippers are cleaned and checked for wear
- 2.4Glue units are checked for wear and cleaned, and excess glue and build-up removed from glue nipples
- 2.5Glue applicators are cleaned and checked for wear
- 2.6Hot melt residues are removed and glue pot is cleaned
- 2.7Base and underneath of machine are cleaned of print ink and glue residue
- 2.8Entire machine is blown down, top to bottom, and all grease and oil is removed from components, housings and the floor
- 2.9Cleaning methods which are safe, avoid harm to the environment and follow the manufacturer’s instructions are used
3 Complete cleaning
- 3.1Used cleaning agents and waste materials are disposed of safely
- 3.2When cleaning is finished, machine is checked to ensure it is safe to operate, and all machine guarding is replaced or repositioned in safe working order
- 3.3Obvious faults and wear are documented and reported
Performance evidence
- Evidence of the ability to: safely clean and check a sack and bag machine with minimum downtime according to manufacturer’s specifications and work health and safety (WHS) regulations. Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
Knowledge evidence
- list common faults associated with sack or bag manufacturing machines, the causes, and how to correct them
- identify environmental obligations to be observed
- explain WHS procedures for using cleaning fluids and equipment.
Foundation skills
- Reading: Comprehends information contained in instructions
- Writing: Documents information required for reporting faults or discrepancies
- Navigate the world of work: Complies with work health and safety (WHS) and legislative requirements, and follows organisational policies and procedures relevant to own role
- Get the work done: Plans, identifies and assembles resources required to complete tasks; Follows directions to complete familiar tasks
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing ICPCBF297
What does an assessment tool for ICPCBF297 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICPCBF297 needs to address all 22 unit components: 3 elements with 14 performance criteria, 1 performance evidence requirements, 3 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for ICPCBF297?
Auditori pulls the current release of ICPCBF297 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICPCBF297 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing ICPCBF297 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICPCBF297, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- ICPCBF2140 — Set up single-faced web
- ICPCBF2160 — Set up double-faced web
- ICPCBF2180 — Produce basic folded and glued cartons
- ICPCBF220 — Produce basic converted or finished product
- ICPCBF2210 — Set up and produce basic guillotined product
- ICPCBF2250 — Set up machine for basic flat-bed die cutting or embossing
- ICPCBF2260 — Produce basic flat-bed die cut or embossed product
- ICPCBF2270 — Set up machine for basic rotary die cutting or embossing
- ICPCBF228 — Produce basic rotary die cut or embossed product
- ICPCBF2310 — Set up machine for basic flat-bed cutting
- ICPCBF2320 — Produce basic flat-bed cut product
- ICPCBF2410 — Set up machine for basic folding
Your ICPCBF297 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate ICPCBF297 free