FWPTMM3214 — Assemble timber floor trusses

1 Prepare for assembly

• 1.1Determine job requirements from work order or fabrication plan, and where required, confirm with appropriate person
• 1.2Confirm safety requirements for timber floor truss assembly according to workplace safety procedures
• 1.3Identify type and determine quantity of material required for assembly of floor trusses according to fabrication plan
• 1.4Determine type of nail plates and components required from specifications
• 1.5Select, fit and use personal protective equipment (PPE)
• 1.6Select appropriate tools and equipment, check for serviceability according to manufacturer recommendations and report faults or damage
• 1.7Determine job priorities and sequence job tasks according to fabrication plan

2 Set up for floor timber truss assembly

• 2.1Prepare, set up and adjust assembly table or jigs to specified floor truss pattern configuration
• 2.2Select and position pre-cut material to include webs, overhang and other design requirements
• 2.3Discard defective or unsuitable components according to workplace procedures
• 2.4Clamp components in jigs and check for fit and allowable tolerances
• 2.5Select and position steel nail plates accurately over joints according to fabrication plan

3 Control pressing operations

• 3.1Conduct a pre-operation check on truss press equipment according to manufacturer instructions and workplace procedures
• 3.2Carry out inspection of initial truss to ensure all nail plates are fixed according to fabrication plan
• 3.3Coordinate and operate truss-pressing operations and confirm finished product complies with fabrication plan and work order

4 Prepare products for despatch and report

• 4.1Remove components from assembly table or jigs, and safely stack in designated location according to workplace safety requirements
• 4.2Strap, pack and label finished product ready for despatch
• 4.3Report equipment faults or production problems according to workplace procedures
• 4.4Complete and maintain accurate records and reports of assembly outcomes according to workplace procedures

5 Clean up

• 5.1Clean work area and recycle, reuse or dispose of waste according to workplace and environmental requirements
• 5.2Clean and maintain tools, equipment and machinery, and report any faults or damage according to workplace procedures
• 5.3Return and safely store tools and equipment to designated areas

What does an assessment tool for FWPTMM3214 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for FWPTMM3214 needs to address all 67 unit components: 5 elements with 22 performance criteria, 3 performance evidence requirements, 40 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for FWPTMM3214?

Auditori pulls the current release of FWPTMM3214 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for FWPTMM3214 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing FWPTMM3214 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of FWPTMM3214, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.