CPCCWP3004 — Apply waterproofing remedial processes
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for CPCCWP3004 must cover
51 assessable components: 4 elements (14 performance criteria), 4 performance evidence and 33 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare to apply waterproofing remedial processes.
- 1.1Read and interpret work instructions and plan sequence of work.
- 1.2Select and use personal protective equipment (PPE) as required for each stage of the task.
- 1.3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
- 1.4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
- 1.5Select tools and equipment, check for serviceability and report any faults.
2 Select waterproofing remedial process and techniques.
- 2.1Inspect and analyse defect that requires application of waterproofing remedial processes.
- 2.2Select techniques and materials for the waterproofing remedial process in accordance with manufacturers’ specifications.
3 Apply waterproofing remedial process and techniques.
- 3.1Prepare materials for remedial process to manufacturers’ recommendations.
- 3.2Prepare and set up application equipment.
- 3.3Prepare substrate for application.
- 3.4Apply remedial waterproofing process to manufacturers’ recommendations.
- 3.5Perform tests to confirm effectiveness of repair.
4 Clean up.
- 4.1Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.
- 4.2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ recommendations.
Performance evidence
- analysing defects that require application of waterproofing remedial systems in each of the following: a crack in concrete or masonry of a minimum 900 millimetres, a cracked concrete or masonry floor/wall junction of a minimum 900 millimetres, rising damp in a minimum 900 millimetre length of concrete/masonry wall, a live leak in concrete or masonry, a damaged waterproofing membrane
- selecting waterproofing remedial techniques for each of the above waterproofing remedial processes
- repairing a minimum of two of the above defects using at least three different remedial waterproofing techniques
- All work must be performed to the standard required in the workplace and must comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications and workplace requirements.
Knowledge evidence
- requirements of Australian Standards for applying waterproofing remedial processes
- safety requirements for applying waterproofing remedial processes, including: job safety analyses and/or safe work method statements in accordance with Safe Work Australia Code of Practice for Construction Work or state and/or territory equivalent
- safety data sheets (SDS)
- personal protective equipment (PPE)
- tests of effectiveness of remedial waterproofing: water test
- flood test
- moisture readings
- thermal survey
- visual inspection
- manufacturers’ specifications for waterproofing systems and materials
- remedial waterproofing techniques: remedial injection epoxies or urethanes
- hydraulic plug or seals
- cement crystallisation or hydrostatic coating methods
- concrete repair systems
- damp-proof course injections
- application of densifiers
- remediation to damaged membrane systems
- characteristics and applications of remedial waterproofing materials: cementitious products
- epoxies
- expanding polyurethane foam
- polyurethane resin systems
- silicon, silane and siloxane products
- single and dual component resins
- construction systems and waterproofing considerations: barriers to stop rising damp
- concrete crystallisation/injection
- concrete repair injection hydrostatic barrier coatings
- membranes
- saturants on an external wall (in case of flood)
- types and uses of materials storage and environmentally friendly waste management
- technical specifications for applying waterproofing remediation
- types and uses of tools and equipment
- principles and considerations of water exclusion
- quality requirements for waterproofing remediation.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing CPCCWP3004
What does an assessment tool for CPCCWP3004 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCWP3004 needs to address all 51 unit components: 4 elements with 14 performance criteria, 4 performance evidence requirements, 33 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for CPCCWP3004?
Auditori pulls the current release of CPCCWP3004 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCWP3004 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing CPCCWP3004 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCWP3004, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- CPCCWP2001 — Handle waterproofing materials and components
- CPCCWP2002 — Use waterproofing tools and equipment
- CPCCWP2004 — Prepare surfaces for waterproofing application
- CPCCWP3001 — Apply waterproofing system to below ground level wet areas
- CPCCWP3002 — Apply waterproofing process to internal wet areas
- CPCCWP3003 — Apply waterproofing process to external above-ground wet areas
- CPCCWP3005 — Assess construction waterproofing processes
- CPCCWP5001 — Design below ground waterproofing
- CPCCWP5002 — Design external above ground waterproofing
- CPCCWP5003 — Design waterproofing to internal wet area
- CPCCWP5004 — Determine origin of water and moisture ingress into buildings
- CPCCWP5005 — Prepare a scope of works for remedial waterproofing
Your CPCCWP3004 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate CPCCWP3004 free