CPCCWF3004 — Repair wall and floor tiling

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate CPCCWF3004 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for CPCCWF3004 must cover

25 assessable components: 3 elements (14 performance criteria), 3 performance evidence and 8 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare to repair wall and floor tiling.

1.1Read and interpret task work instructions and plan sequence of work.
1.2Select and use personal protective equipment (PPE) as required for each task stage.
1.3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
1.4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
1.5Select tools and equipment, check for serviceability and report any faults.
1.6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

2 Repair damaged tiles

2.1Remove damaged or defective tiles avoiding damage to surrounding tiles.
2.2Clean and clear old bedding to allow installation of replacement tile.
2.3Repair or replace existing waterproofing.
2.4Select and cut replacement tiles to match surrounding tiles.
2.5Install tiles to maintain alignment with joints.
2.6Carry out grouting and clean tiles.

3 Clean up.

3.1Clear work area and dispose of, reuse or recycle materials.
3.2Clean, check, maintain and store plant, tools and equipment in accordance with manufacturers’ recommendations.

Performance evidence

To demonstrate competency, a candidate must satisfy all of the elements, performance criteria and foundation skills of this unit by removing and replacing a minimum of three damaged wall tiles and three damaged floor tiles, combined minimum area one square metre, which are installed with adhesive.
In performing the above tasks, at least one tile must be installed to waterproofing which requires repair.
All work must be performed to the standard required in the workplace and must comply with Commonwealth and state/territory laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications and workplace requirements.

Knowledge evidence

compliance requirements of Australian Standards for repairing tiles
safety requirements for repairing tiles, including: job safety analyses and/or or safe work method statements in accordance with Safe Work Australia Code of Practice for Construction Work or state and and/or or territory equivalent; personal protective equipment (PPE)
environmental requirements for repairing tiles
types and uses of materials storage and environmentally friendly waste management
types and uses of tools and equipment types for repairing tiles
processes for the calculation of material requirements
techniques for removing and replacing tiles to walls and floors
tiling material qualities, characteristics, preparation requirements, techniques, applications and limitations: adhesive types and classifications; grout types, including epoxy grout.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing CPCCWF3004

What does an assessment tool for CPCCWF3004 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCWF3004 needs to address all 25 unit components: 3 elements with 14 performance criteria, 3 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCWF3004?

Auditori pulls the current release of CPCCWF3004 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCWF3004 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCWF3004 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCWF3004, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your CPCCWF3004 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate CPCCWF3004 free