CPCCLTC4001 — Licence to operate a tower crane

Elements & performance criteria

Performance evidence

• To demonstrate competency in this unit, a candidate must meet the elements and performance criteria by safely operating from the cabin, a tower crane with a minimum tower height of 20 m and a maximum rated capacity of at least 3000 kg. The candidate must move four loads of different shapes, sizes and weights in conjunction with a licensed dogger.
• For all loads, the candidate must:
• check relevant workplace information, including safe work method statements (SWMSs), and equipment service and maintenance records and checklists
• perform all activities in compliance with safe work practices and workplace-specific procedures and policies
• check, use, maintain and store equipment in compliance with manufacturer requirements
• identify hazards and implement appropriate risk controls and safety measures and equipment
• confirm that load weight is within the rated capacity of the crane
• locate and interpret signs and labels
• check and use safety devices
• lift and move loads using the main hook through an obstacle course including a 90-degree minimum slew, with the load in full view of the candidate and using all crane operational controls: luffing/trolleying levers, hoisting and lowering levers, slewing levers, foot pedals, engine speed control
• use two-way radio and interpret hand and whistle signals to communicate with licensed dogger
• implement shutdown procedures.
• Movements must include: luffing or trolleying, slewing, hoisting and lowering.
• Loads must include: a load of more than 50% of the configured capacity of the crane, stillage containing at least ten scaffolding standards or loose steel pipes of 200 kg or more that requires a licensed dogger to sling, an uneven load that requires a licensed dogger to sling, a round load with a minimum diameter of 300 mm and minimum length of 3 m that requires a licensed dogger to sling.

Knowledge evidence

• To be competent in this unit, a candidate must demonstrate knowledge of:
• safe work requirements for operating a tower crane under Australian Standards, and Commonwealth and state or territory work health and safety (WHS) legislation and codes of practice
• workplace information, including legislative requirements covered by: SWMSs, permits and certifications, information about equipment: service and maintenance checklists and records, manufacturer specifications and manuals, workplace procedures, including emergency plans and incident reporting
• hazard identification and mitigation strategies, including the hierarchy of control: elimination, substitution, isolation, engineering controls, administrative controls, use of personal protective equipment (PPE)
• hazards commonly encountered in tower crane operations: overhead and underground hazards, including powerlines, other cranes and booms, other plant, obstructions, combustible substances, including fuel, electrical hazards, insufficient lighting, traffic, wind and other adverse weather conditions, pedestrian traffic, work required at heights
• risk controls and safety measures and equipment: safety tags on electrical switches and isolators, insulated powerlines, safety observer, exclusion zone, disconnected power, traffic barricades and controls, pedestrian controls, movement of obstructions, evacuation procedures, adequate illumination, firefighting equipment, including a fire extinguisher of adequate capacity near the operator’s position, appropriate earthing for the conditions, such as static electricity build up due to electromagnetic radiation (EMR) or wind, fall prevention and fall arrest equipment
• PPE: hard hat, safety boots, gloves, high-visibility clothing, breathing, hearing, sight, skin and sun protection
• hand and whistle communication signals: stop, hoist up and down, luff boom up and down, trolley in and out, slew left and right
• signs and labels: crane data plates and labels, load charts, crane decals, operational control lever labels
• tower crane safety devices: audible and visual devices, aviation lights, illumination, motion limits, overload limits, anti-collision devices
• crane controls: luffing levers, hoisting and lowering levers, slewing levers, trolleying levers, slew and boom brake and locks, foot pedals, emergency stop control, engine speed control
• crane movements: luffing, slewing, hoisting and lowering, trolleying
• multiple crane communication systems
• processes for responding to unplanned and unsafe situations, including equipment failure or loss of control
• emergency and evacuation procedures, including fire procedures
• shutdown procedures as applicable: raise boom or jib to shutdown position, park trolley in shutdown position, retract hoist rope and hook block, idle engine to stabilise temperature, turn off engine, place in weather vane mode, remove key from ignition, isolate electrical supply, isolate fuel, lock and secure cabin, lock and secure platform access hatch
• tower crane characteristics, capabilities and operation to suit loads of different shapes, sizes and weights
• use and interpretation of crane manufacturer specifications, including load charts to enable the crane to be configured within its rated capacity.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

Questions about assessing CPCCLTC4001