CPCCLRG3001 — Licence to perform rigging basic level

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate CPCCLRG3001 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for CPCCLRG3001 must cover

54 assessable components: 5 elements (27 performance criteria), 14 performance evidence and 12 knowledge evidence requirements, plus 1 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan task.

1.1Review task instructions, consult with relevant persons to seek clarification as required, and obtain relevant workplace information.
1.2Obtain and interpret information, including safe work method statements (SWMSs), required to ensure that activities are performed in compliance with workplace-specific and safe work requirements.
1.3Obtain and interpret information required to ensure that equipment inspection, use, maintenance and storage complies with manufacturer requirements.
1.4Identify workplace and task-specific hazards and determine required risk controls and safety measures and equipment, including signs and barricades, personal protective equipment (PPE), and fall prevention and fall arrest equipment.
1.5Identify methods of moving and placing tools, equipment and materials to minimise the risk of falling objects, to avoid inappropriate carrying on ladders and to minimise hazardous manual tasks.
1.6Identify required rigging equipment and associated gear.
1.7Calculate loads associated with mechanical load shifting equipment and associated gear required to erect and dismantle structures and plant.
1.8Establish required communication methods with relevant persons.

2 Select and inspect equipment.

2.1Select risk controls and equipment, including fall prevention and fall arrest equipment, and check that it is working and fit for purpose.
2.2Select and check PPE.
2.3Select rigging equipment and associated gear, inspect for defects, and isolate, tag out, report and record defective items.
2.4Select communication equipment and check that it is working and fit for use.

3 Set up task.

3.1Establish and maintain communication with relevant persons to ensure task plan and risk controls are communicated clearly, including any impact on other workplace activities.
3.2Ensure risk controls and safety measures and equipment have been put in place, including the fitting, adjusting and anchoring of fall protection equipment.
3.3Consult with relevant persons to ensure that ground and foundation have been assessed as suitable for task.
3.4Consult with relevant persons to ensure that the structure has been assessed as suitable for load bearing task.

4 Undertake basic rigging activities.

4.1Erect and dismantle all structures and plant while maintaining stability, in accordance with workplace and manufacturer requirements.
4.2Erect structural steel.
4.3Erect pre-cast concrete members of a structure, or lift and install a series of scenery panels.
4.4Erect and dismantle a safety net and static line.
4.5Erect and dismantle a hoist or mast climbing work platform.
4.6Install and dismantle a perimeter safety screen or shutter.
4.7Install and dismantle a cantilevered crane loading platform.

5 Complete task.

5.1Remove excess materials from work area.
5.2Inspect structures, plant, equipment and gear for defects, and isolate, tag out and report defective items.
5.3Store plant, equipment and gear in accordance with workplace requirements.
5.4Remove risk controls and safety measures and equipment.

Performance evidence

erecting and dismantling a portal frame of structural steel consisting of columns (150 UC 29.8 kg/m), beams (minimum 200 UB 29.8 kg/m) and braces in accordance with engineering detail. It must include: appropriate structural bolts, nuts, washers, purlins and girts; beams installed at a height of at least 4 m; suitable access and working platform (e.g. elevated work platform, mobile scaffold, scissor lift, portable industrial grade ladder). It must be packed and plumbed and include temporary bracing during erection and dismantling. Hand tools and working at height safety equipment, including harness, lanyard and inertia reel, must be used
installing and removing a series of three retaining wall panels, each panel being not less than 4 m high by 2 m wide and not less than 1.5 tonnes. One panel must be set at a 90-degree angle to one of the other panels - candidates must identify any defective lifting equipment
installing and removing a safety (catch) net with minimum dimensions of 3 m x 4 m in accordance with manufacturer specification and engineering detail on portal frame - candidates must identify any defective nets
installing, using and removing a static line at least 2.1 m above the beams on portal frame, in accordance with manufacturer specifications and engineering detail – candidates must identify any defective static lines and associated equipment
installing and removing a cantilevered materials hoist (1 or 2 barrow) or a mast climbing work platform of at least three mast sections and tied in accordance with specifications
installing and dismantling a perimeter safety screen or shutter of at least 4 m x 2 m in accordance with manufacturer specifications and engineering detail
installing and dismantling a cantilevered crane loading platform at a height of at least 4 m with secure gates and handrails in accordance with manufacturer specifications and engineering detail
setting up and operating a powered winch to move a load of at least 1 tonne
using the following splice and hitch techniques: eye splice; becket hitch.
check relevant workplace information, including safe work method statements (SWMSs) and equipment service and maintenance records and checklists
perform all activities in compliance with workplace-specific, safe work and manufacturer requirements
use the following associated gear: beam clamps or pipe clamps or plate clamps; tag lines; flexible steel wire rope (FSWR); chains; wire and synthetic slings; shackles; wedge sockets; eye bolts; rope grips; turnbuckles; chain blocks; sheave blocks; spreader bars or lifting beam; levers/podgers; skates/rollers; wedges; props; powered winches; snatch blocks; wire rope winches; lever pull (e.g. come-alongs)
identify hazards and use appropriate risk controls and safety measures and equipment
safely erect and dismantle structures and plant.

Knowledge evidence

safe work requirements for rigging under Australian Standards and Commonwealth and state or territory work health and safety (WHS) legislation, regulations, standards and codes of practice
workplace information, including legislative requirements covered by: SWMSs; permits and certifications; information about equipment: service and maintenance checklists and records; manufacturer and supplier specifications and manuals; workplace procedures, including emergency plans and incident reporting
hazard identification and mitigation strategies, including the hierarchy of control: elimination; substitution; isolation; engineering controls; administrative controls; use of personal protective equipment (PPE)
hazards commonly encountered in rigging basic level: instability of work areas; damaged or poor-quality equipment; overhead and underground hazards; electrical items; mobile plant; insufficient lighting; wind and other adverse weather conditions; traffic; pedestrian traffic; hazardous manual tasks; falling objects; falls from heights
minimum clearance distance from powerlines or electrical equipment specific to mobile plant and scaffolding and other structures as determined by relevant state or territory authority or electrical supply authority
risk controls and equipment: traffic control; pedestrian barricades; PPE; adequate illumination
safety structures and screens
inspection, handling and storage of rigging structures and equipment, associated gear, and other required equipment: rigging structures and equipment: elevated work platforms; cantilevered crane loading platforms; portal frames; hoists; pre-cast concrete members; mast climbing work platform; safety screens and shutters; safety nets; associated gear: power and manually operated lifting gear; lifting clutches; tag lines; FSWR; chains; wire and synthetic slings; shackles; terminations; wedge sockets; eye bolts; beam clamps; pipe clamps; plate clamps; rope grips; turnbuckles; chain blocks; lever blocks; lever-action winches; sheaves; spreader bars; lifting beams; jacks; levers; skates; wedges; rollers; beam trolley; props; safety equipment: full-body safety harness; energy absorber; lanyard; inertia reel (fall arrester); static safety lines; PPE: hard hat; safety boots; gloves; high-visibility clothing; breathing, hearing, sight, skin and sun protection; communication equipment: two-way radios; whistles
relevant persons: doggers; riggers; crane operators; engineers; supervisors
ground and foundation suitability: rough, uneven ground; backfilled ground; soft soils; hard compacted soil; rock; bitumen; concrete; suspended concrete floors; building roofs; landings; ground bearing pressure
mathematical processes for estimating and measuring loads for basic rigging
techniques for making temporary connections.

Foundation skills

Foundation Skills: Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing CPCCLRG3001

What does an assessment tool for CPCCLRG3001 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCLRG3001 needs to address all 54 unit components: 5 elements with 27 performance criteria, 14 performance evidence requirements, 12 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCLRG3001?

Auditori pulls the current release of CPCCLRG3001 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCLRG3001 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCLRG3001 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCLRG3001, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your CPCCLRG3001 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate CPCCLRG3001 free