Auditori
Get started

AURVTT009 — Remove and replace vehicle and vessel seats and fittings

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURVTT009 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURVTT009 must cover

29 assessable components: 3 elements (14 performance criteria), 1 performance evidence and 8 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to remove and replace seats and fittings

  • 1.1Job requirements are determined from workplace instructions
  • 1.2Removal and replacement information is sourced and interpreted
  • 1.3Hazards associated with the work are identified and risks are managed
  • 1.4Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5Work area and storage racks are prepared according to workplace procedures
  • 1.6Work is planned to minimise waste and use time efficiently

2 Remove and replace seats and fittings

  • 2.1Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components
  • 2.2Seats and fittings are stored safely until needed for replacement
  • 2.3Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned

3 Complete work processes

  • 3.1Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2Authorised personnel are informed of work outcome according to workplace procedures
  • 3.3Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.4Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.5Workplace documentation is processed according to workplace procedures

Performance evidence

  • remove and replace three different vehicle or vessel front and rear seats and fittings.

Knowledge evidence

  • work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing vehicle and vessel seats and fittings, including procedures for: - selecting and using personal protective equipment (PPE) - using specialist tools and equipment - manual handling techniques
  • environmental requirements, including procedures for trapping, storing and disposing of waste materials
  • manufacturer instructions for removing and replacing seats and fittings, including: - electric seats - seat massage - heated seats - memory seats
  • types and use of workplace tools and equipment required for removing and replacing seats and fittings
  • vehicle and marine electric seat disconnection and reconnection procedures
  • procedures and requirements for safely storing seat and trim components
  • procedures for protecting vehicle and components when removing and replacing seats and fittings
  • procedures for final inspection and testing of replaced seats and fittings

Foundation skills

  • Learning skills: locate appropriate sources of information efficiently.
  • Writing skills: legibly and accurately fill out workplace documentation.
  • Oral communication skills: clarify instructions and procedures clearly report quality issues and job outcomes.
  • Numeracy skills: identify seat and trim fastener codes and numbers.
  • Planning and organising skills: plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes.
  • Technology skills: use specialist removal and installation equipment.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURVTT009

What does an assessment tool for AURVTT009 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURVTT009 needs to address all 29 unit components: 3 elements with 14 performance criteria, 1 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURVTT009?

Auditori pulls the current release of AURVTT009 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURVTT009 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURVTT009 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURVTT009, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURVTT009 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURVTT009 free