AURTTJ003 — Remove and replace wheel and tyre assemblies
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURTTJ003 must cover
40 assessable components: 4 elements (17 performance criteria), 1 performance evidence and 13 knowledge evidence requirements, plus 9 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to remove and replace wheel and tyre assemblies
- 1.1Safety requirements are sourced and interpreted
- 1.2Task instruction is interpreted and vehicle wheel and tyre assemblies to be worked on are identified
- 1.3Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted
- 1.4Potential hazards and risks associated with task are identified and reported to workplace supervisor
- 1.5Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications
2 Remove and inspect vehicle wheel and tyre assemblies
- 2.1Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
- 2.2Vehicle is prepared for wheel removal according to workplace procedures and safety requirements
- 2.3Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
- 2.4Wheel and tyre assemblies are identified and inspected according to manufacturer specifications
- 2.5Wheel and tyre assembly inspection results are recorded
3 Replace wheel and tyre assemblies
- 3.1Wheel and tyre assemblies are prepared for replacement
- 3.2Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment
- 3.3Wheel and tyre assembly on vehicle is checked for correct operation
4 Complete work processes
- 4.1Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures
- 4.2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
- 4.3Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary
- 4.4Workplace documentation is processed according to workplace procedures
Performance evidence
- correctly remove and replace the wheel and tyre assemblies of at least two different vehicles.
Knowledge evidence
- key aspects of work health and safety (WHS) and occupational health and safety (OHS) requirements, including:
- use of personal protective equipment, including safety glasses, ear protection and safety footwear
- use of hand tools and lifting equipment
- procedures for handling wheel and tyre assemblies
- types and application of wheel assemblies, including:
- stamped or pressed steel wheels
- alloy wheels
- wheel studs and nuts
- tyres, including cross-ply and radial tyres
- inspection procedures for tyre and wheel assemblies, including wheel inspection and tyre wear
- removal and replacement procedures and precautions
- tyre air pressure setting and test procedures
- work area clean-up and maintenance requirements.
Foundation skills
- Learning skills: locate appropriate sources of wheel and tyre assembly information and assembly removal and replacement procedures.
- Reading skills: select and interpret key information from manufacturer specifications, safety requirements and workplace procedures to safely remove and replace wheel and tyre assemblies select and interpret key information from environmental requirements and workplace procedures to ensure a clean and safe work site.
- Writing skills: legibly and accurately fill out workplace documentation using correct industry terminology and conventions.
- Oral communication skills: participate effectively in verbal exchanges using questioning and active listening to request, clarify and clearly convey information.
- Numeracy skills: read and interpret metric and imperial systems of measurement read and interpret numerical information in wheel and tyre identification codes use specialist tools correctly, including pressure gauges, and report and record the results correctly using relevant mathematical symbols and conventions (e.g. kPa for kilopascals) use basic mathematical operations, including addition and subtraction, to calculate length.
- Planning and organising skills: plan own work requirements and prioritise actions to achieve required outcomes.
- Self-management skills: recognise own limitations when selecting and using tools and equipment and seek timely advice.
- Problem-solving skills: identify potential or actual hazards and take action to minimise risk refer problems that cannot be readily resolved and seek assistance from workplace supervisor.
- Technology skills: set up and operate equipment and tools required to remove and replace wheel and tyre assemblies.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURTTJ003
What does an assessment tool for AURTTJ003 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURTTJ003 needs to address all 40 unit components: 4 elements with 17 performance criteria, 1 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURTTJ003?
Auditori pulls the current release of AURTTJ003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURTTJ003 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURTTJ003 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURTTJ003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURTTJ003 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURTTJ003 free