AURRTR106 — Diagnose and repair marine electrical systems
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURRTR106 must cover
76 assessable components: 4 elements (16 performance criteria), 8 performance evidence and 46 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to diagnose and repair marine electrical system
- 1.1Identify job requirements from workplace instructions
- 1.2Identify required information for diagnosis activity
- 1.3Analyse diagnostic options and source testing strategy to identify cause of fault using workplace and manufacturer procedures
- 1.4Identify hazards and environmental issues associated with diagnose and repair activity, assess potential risks and implement control measures in line with workplace policies and procedures
- 1.5Identify tools and equipment required for testing strategy and establish serviceability according to workplace procedures
2 Diagnose marine electrical system
- 2.1Implement diagnostic tests set out in testing strategy according to manufacturer and workplace procedures, and workplace health and safety requirements
- 2.2Identify cause of fault through analysis of diagnostic test results
- 2.3Confirm and report cause of fault according to workplace procedures
- 2.4Develop and report recommendations for necessary repairs according to workplace procedures
3 Repair marine electrical system
- 3.1Identify required information for repair activity
- 3.2Identify tools, equipment and materials required for repair activity and establish serviceability according to workplace procedures
- 3.3Carry out repairs according to workplace and manufacturer procedures, manufacturer specifications, workplace health and safety and environmental requirements
- 3.4Carry out post-repair testing according to workplace procedures, workplace health and safety and environmental requirements
4 Complete work processes
- 4.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 4.2Clear work area and dispose of or recycle materials according to workplace procedures
- 4.3Complete documentation according to workplace procedures
Performance evidence
- diagnose and repair a fault in the following marine electrical systems and components:
- dash instrumentation
- switch and fuse panels
- bilge pump system
- lighting system
- depth sounder or fish finder
- global positioning system (GPS)
- marine radio
Knowledge evidence
- methods to locate and interpret information required to diagnose and repair marine electrical systems including:
- information provided by customers and supervisors
- manufacturer specifications and procedures or equivalent documentation
- workplace procedures required to diagnose and repair marine electrical systems including:
- establishing serviceability of tools and equipment
- documentation procedures
- housekeeping procedures including:
- examination of tools and equipment
- storage of equipment
- identification, tagging and isolation of faulty equipment
- disposal of excess materials
- recycling procedures
- workplace health and safety (WHS) requirements relating to diagnosing and repairing marine electrical systems, including procedures for:
- checking and dealing with flammable gas build-up in boats, including LPG and hydrogen, prior to starting electrical system work
- working with potentially high-current electrical systems
- environmental requirements relating to diagnosing and repairing marine electrical systems
- operating principles of electrical systems and associated components, including:
- Ohm’s law
- electromagnetic interference
- purpose and operation of electrical systems and components, including:
- marine vessel lighting systems, including marine regulations for vessel lighting
- dash instrumentation
- switch and fuse panels
- bilge pump systems
- depth sounders and fish finders
- GPS
- marine radios
- 12-volt marine accessories, including winches
- autopilot and radar
- marine battery charge management systems
- networked communication topographies
- diagnostic testing procedures for marine electrical systems, including:
- testing for circuit resistance, voltage drop and current draw
- testing for open and short circuits
- testing for shorts to power circuits and grounds
- inspecting for component moisture ingress and connector damage
- testing marine battery charge management systems
- testing networked communication topographies
- repair procedures for marine electrical systems, including procedures for:
- selecting wiring gauge
- soldering wiring
- insulating wiring
- crimping terminals
- removing and replacing connectors
- repairing networked communication topographies
- post-repair testing procedures for marine electrical systems
Foundation skills
- Learning: Locates required sources of information efficiently Develops a sequenced plan for a specific task.
- Reading: Interprets wiring diagrams Organises and interprets technical information from workplace procedures, manufacturer procedures and manufacturer specifications.
- Oral communication: Clarifies instructions Obtains information from customers and supervisors.
- Numeracy: Uses mathematical operations Calculates current flow, resistance and voltage Interprets numbers on electrical measuring equipment Calculates deviations from manufacturer specifications.
- Planning and organising: Plans own work requirements Prioritises actions to achieve required outcomes Ensures tasks are completed within workplace timeframes.
- Technology: Uses electrical measuring equipment.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURRTR106
What does an assessment tool for AURRTR106 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURRTR106 needs to address all 76 unit components: 4 elements with 16 performance criteria, 8 performance evidence requirements, 46 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURRTR106?
Auditori pulls the current release of AURRTR106 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURRTR106 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURRTR106 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURRTR106, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURRTR106 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURRTR106 free