AURMTA104 — Prepare competition vehicles at motor sport events

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURMTA104 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURMTA104 must cover

41 assessable components: 6 elements (20 performance criteria), 1 performance evidence and 13 knowledge evidence requirements, plus 7 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for work

1.1Determine job requirements from event information and check against ‘on the day’ operating conditions, and seek required clarification of specifications
1.2Select and check tools and equipment for serviceability
1.3Identify hazards associated with the work and manage risks
1.4Clean work area and lay out for job requirements

2 Finalise technical preparation

2.1Configure vehicle settings for each race
2.2Report problems with work area or operation of equipment to persons according to team procedures as required
2.3Propose modifications or adaptation of equipment as required according to team procedures
2.4Document vehicle settings according to team procedures

3 Conduct pre-race checks

3.1Carry out checks according to team checklists and without causing damage to components
3.2Report problems with components or systems as required to persons according to team procedures

4 Prepare vehicle for scrutineering

4.1Inspect vehicle systems and safety components according to regulatory body requirements, category rules and supplementary regulations
4.2Identify and rectify problems with vehicle compliance according to team procedures as required
4.3Report problems with vehicle compliance that cannot be rectified to persons according to team procedures as required

5 Conduct between-race maintenance

5.1Inspect condition of components and systems according to team checklist, and repair or replace as required according to safety requirements and team procedures
5.2Clean and refuel vehicle according to team procedures and safety and environmental requirements
5.3Collect and log vehicle manual and electronic data according to team procedures
5.4Conduct driver or rider technical debrief according to team procedures

6 Complete work processes

6.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
6.2Clear work area and dispose of or recycle materials according to workplace procedures
6.3Complete team and event documentation according to workplace procedures

Performance evidence

prepare a different competition vehicle for at least two different motor sport events, one of which may be a simulated event.

Knowledge evidence

methods to locate and interpret information required to prepare competition vehicles at motor sport events, including: information provided by customer and supervisors; team instructions; manufacturer specifications and procedures or equivalent documentation; category rules and supplementary regulations, including: allowable design, quality, material, equipment and quantities
workplace procedures required to prepare competition vehicles at motor sport events, including: establishing serviceability of tools and equipment; documentation procedures; housekeeping procedures, including: examination of tools and equipment, storage of equipment, identification, tagging and isolation of faulty equipment, disposal of excess materials; recycling procedures
work health and safety (WHS) requirements relating to preparing competition vehicles at motor sport events, including procedures for: selecting and using personal protective equipment (PPE); using motor sport event safety equipment, including firefighting equipment; identifying acceptable tolerance levels for noise, heat and fumes
methods of panel creation and their processes
environmental requirements, including procedures for trapping, storing and disposing of fluids and contaminants released during vehicle preparation
technical preparation procedures, including procedures for configuring: vehicle settings for individual events, including: team specifications, baseline configurations, category rules and supplementary regulations; work area for individual events
pre-race checking procedures
vehicle scrutineering preparation procedures, including: inspection techniques; regulatory body requirements, category rules and supplementary regulations; non-compliance rectification procedures
between-race maintenance procedures, including: inspection procedures; gear ratio calculations; cleaning and re-fuelling procedures; vehicle manual and electronic data collection and logging procedures
procedures for reporting and recording equipment and component defects
procedures for driver or rider technical debriefings
post-race clean-up procedures, including: work area and vehicle cleaning procedures; tool and equipment checking and storage procedures
procedures for processing team and event documentation.

Foundation skills

Learning: Locates required sources of information efficiently; Applies team procedures to different situations and motor sport events.
Numeracy: Measures components and uses basic addition, subtraction, division and multiplication, to calculate tolerances and clearances; Uses basic mathematical operations to calculate volume and area.
Reading: Interprets team instructions, team checklists, regulatory body requirements, category rules and supplementary regulations.
Planning and organising: Ensures that own tasks are carried out within team operation timeframes.
Problem solving: Proposes modifications or adaptation of equipment to overcome preparation issues; Proposes possible solutions to compliance issues.
Self-management: Works efficiently with minimal supervision.
Technology: Navigates computer software and accesses and logs manual and electronic data.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURMTA104

What does an assessment tool for AURMTA104 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURMTA104 needs to address all 41 unit components: 6 elements with 20 performance criteria, 1 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURMTA104?

Auditori pulls the current release of AURMTA104 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURMTA104 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURMTA104 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURMTA104, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURMTA104 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURMTA104 free