AURLTQ102 — Diagnose and repair light vehicle drive shafts
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURLTQ102 must cover
33 assessable components: 4 elements (16 performance criteria), 2 performance evidence and 9 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to diagnose and repair light vehicle drive shaft
- 1.1Identify job requirements from workplace instructions
- 1.2Identify required information for diagnosis activity
- 1.3Analyse diagnostic options and source testing strategy to identify cause of fault using workplace and manufacturer procedures
- 1.4Identify hazards and environmental issues associated with diagnose and repair activity, assess potential risks and implement control measures in line with workplace policies and procedures
- 1.5Identify tools and equipment required for testing strategy and establish serviceability according to workplace procedures
2 Diagnose light vehicle drive shaft
- 2.1Implement diagnostic tests set out in testing strategy according to manufacturer and workplace procedures, and workplace health and safety requirements
- 2.2Identify cause of fault through analysis of diagnostic test results
- 2.3Confirm and report cause of fault according to workplace procedures
- 2.4Develop and report recommendations for necessary repairs according to workplace procedures
3 Repair light vehicle drive shaft
- 3.1Identify required information for repair activity
- 3.2Identify required tools, equipment and materials required for repair activity and establish serviceability according to workplace procedures
- 3.3Carry out repairs according to workplace and manufacturer procedures, manufacturer specifications, workplace health and safety and environmental requirements
- 3.4Carry out post-repair testing according to workplace procedures, workplace health and safety and environmental requirements
4 Complete work processes
- 4.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 4.2Clear work area and dispose of or recycle materials according to workplace procedures
- 4.3Complete documentation according to workplace procedures
Performance evidence
- diagnose and repair drive shafts in two different light vehicles, in which the work must involve: one rear wheel drive vehicle with drive shaft with universal joints, including removing the drive shaft from vehicle, replacing one universal joint, and refitting the drive shaft; one front wheel drive vehicle with constant velocity joint drive shaft, including removing the drive shaft from the vehicle and refitting it
- carry out a diagnostic test in the course of the above for at least one of the following faults: abnormal drive shaft noise; vibrations
Knowledge evidence
- methods to locate and interpret information required to diagnose and repair light vehicle drive shafts, including: information provided by customers and supervisors; manufacturer specifications and procedures or equivalent documentation
- workplace procedures required to diagnose and repair light vehicle drive shafts, including: establishing serviceability of tools and equipment; documentation procedures; housekeeping procedures, including: examination of tools and equipment; storage of equipment; identification, tagging and isolation of faulty equipment; disposal of excess materials; recycling procedures
- workplace health and safety (WHS) requirements relating to diagnosing and repairing light vehicle drive shafts, including procedures for working with hazardous oils
- environmental requirements relating to diagnosing and repairing light vehicle drive shafts, including procedures for trapping, storing and disposing of oils released from drive shafts
- operating principles of light vehicle drive shafts and associated components, including: torque reaction of rear axle housings; torque steer
- purpose and operation of light vehicle drive shafts and components, including: propeller shafts, including: single and multi-piece shafts; universal joints, including cross and yoke joints, double cardan joints and Lobro joints; velocity fluctuation of universal joints; shaft alignment; constant velocity joints, including: Birfield joints; double offset joints; tripod joints
- diagnostic testing procedures for light vehicle drive shafts, including road testing procedures for: drive shaft noise diagnostic; vibration
- repair procedures for light vehicle drive shafts, including procedures for: dismantling drive shafts; inspecting drive shafts; reassembling and aligning components
- post-repair testing procedures for light vehicle drive shafts
Foundation skills
- Learning: Locates required sources of information efficiently Develops a sequenced plan for a specific task.
- Reading: Organises and interprets technical information from workplace procedures, manufacturer procedures and manufacturer specifications.
- Oral communication: Clarifies instructions Obtains information from customers and supervisors.
- Numeracy: Measures drive shaft components Uses mathematical operations Calculates deviations and tolerances from manufacturer specifications Measures angles in degrees.
- Planning and organising: Plans own work requirements Prioritises actions to achieve required outcomes Ensures tasks are completed within workplace timeframes.
- Technology: Uses precision measuring equipment.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURLTQ102
What does an assessment tool for AURLTQ102 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURLTQ102 needs to address all 33 unit components: 4 elements with 16 performance criteria, 2 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURLTQ102?
Auditori pulls the current release of AURLTQ102 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURLTQ102 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURLTQ102 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURLTQ102, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURLTQ102 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURLTQ102 free