AURJTR103 — Diagnose and repair motorcycle starting systems
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURJTR103 must cover
78 assessable components: 4 elements (16 performance criteria), 5 performance evidence and 51 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to diagnose and repair motorcycle starting system
- 1.1Identify job requirements from workplace instructions
- 1.2Identify required information for diagnosis activity
- 1.3Analyse diagnostic options and source testing strategy to identify cause of fault using workplace and manufacturer procedures
- 1.4Identify hazards and environmental issues associated with diagnose and repair activity, assess potential risks and implement control measures in line with workplace policies and procedures
- 1.5Identify tools and equipment required for testing strategy and establish serviceability according to workplace procedures
2 Diagnose motorcycle starting system
- 2.1Implement diagnostic tests set out in testing strategy according to manufacturer and workplace procedures, and workplace health and safety requirements
- 2.2Identify cause of fault through analysis of diagnostic test results
- 2.3Confirm and report cause of fault according to workplace procedures
- 2.4Develop and report recommendations for necessary repairs according to workplace procedures
3 Repair motorcycle starting system
- 3.1Identify required information for repair activity
- 3.2Identify tools, equipment and materials required for repair activity and establish serviceability according to workplace procedures
- 3.3Carry out repairs according to workplace and manufacturer procedures, manufacturer specifications, workplace health and safety and environmental requirements
- 3.4Carry out post-repair testing according to workplace procedures, workplace health and safety and environmental requirements
4 Complete work processes
- 4.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 4.2Clear work area and dispose of or recycle materials according to workplace procedures
- 4.3Complete documentation according to workplace procedures
Performance evidence
- diagnose and repair a fault in the starting system of two different motorcycles or all-terrain vehicles (ATV’s) in which the fault for each is within a different circuit chosen from the following:
- vehicle starter motor and solenoid circuit
- vehicle ignition switch to solenoid control circuit
- vehicle battery to starter motor circuit
- motorcycle starting system circuit.
Knowledge evidence
- methods to locate and interpret information required to diagnose and repair motorcycle starting systems, including:
- information provided by customer and supervisors
- manufacturer specifications and procedures or equivalent documentation
- workplace procedures required to diagnose and repair motorcycle starting systems, including:
- establishing serviceability of tools and equipment
- documentation procedures
- housekeeping procedures, including:
- examination of tools and equipment
- storage of equipment
- identification, tagging and isolation of faulty equipment
- disposal of excess materials
- recycling procedures
- workplace health and safety (WHS) requirements relating to diagnosing and repairing motorcycle starting systems, including procedures for:
- using specialised tools and equipment
- using appropriate personal protective equipment (PPE)
- identifying hazards and controlling risks associated with:
- working on high voltage ignition systems
- wearing jewellery while working around high current wiring systems
- operating principles of motorcycle starting systems and associated components, including:
- producing movement due to the force between magnetic fields
- producing magnetic fields due to current flow through conductors
- basic direct current motor operation, including simple armature, magnetic field and commutator
- purpose and operation of motorcycle starting systems and components, including:
- high current systems, including:
- armature, commutator, field windings
- starter motor windings
- permanent magnet starter motors
- direct drive and reduction-type starter motors
- motorcycle starting electrical systems, including:
- solenoids
- shift levers
- overrunning clutch flywheel ring gears
- control circuits systems, including:
- ignition switching, including key start and push-button start
- safety switches, including inhibitor switches and clutch neutral switches
- diagnostic testing procedures for motorcycle starting systems, including:
- using diagnostic flow charts
- testing electrical systems, including procedures for:
- accessing electrical terminals and using test probes without damaging connectors, fuse holders or wiring
- load testing motorcycle starting systems
- resistance, current flow and voltage drop checks of motorcycle starting system circuits
- solenoid test
- overrunning clutch and pinion tests
- starter motor bench test
- repair procedures for motorcycle starting systems, including:
- tightening connections
- replacing faulty or damaged cable connections
- removing and replacing faulty or damaged components
- post-repair testing procedures for motorcycle starting systems, including:
- checking for electrical connector mating
- static and dynamic performance tests of motorcycle starting systems.
Foundation skills
- Learning: Locates required sources of information efficiently Develops a sequenced plan for a specific task.
- Reading: Organises and interprets technical information from workplace procedures, manufacturer procedures and manufacturer specifications Interprets text, symbols and wiring diagrams in information relating to electrical system testing and repair equipment from manufacturer specifications and workplace instructions and procedures.
- Oral communication: Clarifies instructions Obtains information from customers and supervisors.
- Numeracy: Matches alternator types and part identification numbers to workplace instructions, vehicle, machinery and component part lists, and manufacturer specifications Interprets vehicle electrical measurements and readings Measures voltage, current and resistance and uses mathematical operations Calculates deviations and tolerances from manufacturer specifications.
- Planning and organising: Plans own work requirements Prioritises actions to achieve required outcomes Ensures tasks are completed within workplace timeframes.
- Technology: Uses specialised diagnostic equipment.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURJTR103
What does an assessment tool for AURJTR103 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURJTR103 needs to address all 78 unit components: 4 elements with 16 performance criteria, 5 performance evidence requirements, 51 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURJTR103?
Auditori pulls the current release of AURJTR103 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURJTR103 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURJTR103 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURJTR103, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURJTR103 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURJTR103 free