AURJTE104 — Diagnose and repair motorcycle engine management systems
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURJTE104 must cover
33 assessable components: 4 elements (16 performance criteria), 1 performance evidence and 10 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to diagnose and repair engine management system
- 1.1Identify job requirements from workplace instructions
- 1.2Identify required information for diagnosis activity
- 1.3Analyse diagnostic options and source testing strategy to identify cause of fault using workplace and manufacturer procedures
- 1.4Identify hazards and environmental issues associated with diagnose and repair activity, assess potential risks and implement control measures in line with workplace policies and procedures
- 1.5Identify tools and equipment required for testing strategy and establish serviceability according to workplace procedures
2 Diagnose engine management system
- 2.1Implement diagnostic tests set out in testing strategy according to manufacturer and workplace procedures, and workplace health and safety requirements
- 2.2Identify cause of fault through analysis of diagnostic test results
- 2.3Confirm and report cause of fault according to workplace procedures
- 2.4Develop and report recommendations for necessary repairs according to workplace procedures
3 Repair engine management system
- 3.1Identify required information for repair activity
- 3.2Identify tools, equipment and materials required for repair activity and establish serviceability according to workplace procedures
- 3.3Carry out repairs according to workplace and manufacturer procedures, manufacturer specifications, workplace health and safety and environmental requirements
- 3.4Carry out post-repair testing according to workplace procedures, workplace health and safety and environmental requirements
4 Complete work processes
- 4.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 4.2Clear work area and dispose of or recycle materials according to workplace procedures
- 4.3Complete documentation according to workplace procedures
Performance evidence
- diagnose and repair a fault in the engine management systems of at least three different motorcycles or all-terrain vehicles (ATVs), including: faults in at least two system input sensors; faults in at least one system output actuator.
Knowledge evidence
- methods to locate and interpret information required to diagnose and repair motorcycle engine management systems, including: information provided by customer and supervisors; manufacturer specifications and procedures or equivalent documentation
- workplace procedures required to diagnose and repair motorcycle engine management systems, including: establishing serviceability of tools and equipment; documentation procedures; housekeeping procedures, including: examination of tools and equipment; storage of equipment; identification, tagging and isolation of faulty equipment; disposal of excess materials; recycling procedures
- workplace health and safety (WHS) relating to diagnosing and repairing motorcycle engine management systems, including procedures for: using specialised tools and equipment; using appropriate personal protective equipment (PPE); identifying hazards and controlling risks associated with: working on vehicle high voltage ignition systems; wearing jewellery while working around high current wiring systems; working with high pressure petrol fuel systems
- environmental requirements relating to diagnosing and repairing motorcycle engine management systems
- operating principles of motorcycle engine management systems and associated components, including: combustion, including: air-fuel ratios and chemistry of combustion; composition of petrol fuel, including octane rating; indirect and direct fuel injection
- purpose and operation of motorcycle engine management systems and components, including: fuel system, including: fuel filters; fuel pumps; fuel pressure regulators; fuel injectors; electronic control system, including the following system inputs: throttle position sensors; coolant temperature sensors; oxygen sensors; intake air temperature sensors; crankshaft position sensors; camshaft position sensors; battery voltage; knock sensors; key features of electronic control units (ECUs), including: long-term fuel trim (LTFT); short-term fuel trim (STFT); sensor reference voltages and sensor grounds; system outputs, including: Pulse Air Injection Recirculation (PAIR) solenoid controls; injectors; fuel pump relays; engine cooling fans; throttle motor (drive by wire) controls; variable valve timing controls
- ignition systems and components, including: spark plugs; ignition leads; ignition coils, including electromagnetic induction; ignition timing, including varying ignition timing according to engine load, speed and knock sensor input; dwell period
- diagnostic testing procedures for motorcycle engine management systems, including: diagnostic flow charts; fuel system testing, including: low pressure fuel system testing; high pressure fuel system testing; testing electrical systems, including procedures for: accessing electrical terminals and using test probes without damaging connectors, fuse holders or wiring; injector testing; sensor testing; actuator testing; accessing and interpreting industry-relevant test equipment data, including: diagnostic trouble codes (DTC); live data; freeze frame data
- repair procedures for motorcycle engine management systems, including procedures for: removing and replacing the following electrical or electronic components: sensors; actuators, including fuel injectors and fuel pumps; adjusting and recalibrating components and associated systems
- post-repair testing procedures, including procedures for: clearing fault codes; assessing engine performance; checking for electrical connector mating
Foundation skills
- Learning: Locates required sources of information efficiently; Develops a sequenced plan for a specific task.
- Reading: Organises and interprets technical information from workplace procedures, manufacturer procedures and manufacturer specifications; Interprets text, symbols and wiring diagrams in information relating to electrical system testing and repair equipment from manufacturer specifications and workplace instructions and procedures.
- Oral communication: Clarifies instructions; Obtains information from customers and supervisors.
- Numeracy: Matches electrical components and part identification numbers to workplace instructions, vehicle, machinery and component part lists, and manufacturer specifications; Interprets vehicle electrical measurements and readings; Measures voltage, current and resistance and uses mathematical operations; Calculates deviations and tolerances from manufacturer specifications.
- Planning and organising: Plans own work requirements; Prioritises actions to achieve required outcomes; Ensures tasks are completed within workplace timeframes.
- Technology: Uses specialised diagnostic equipment.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURJTE104
What does an assessment tool for AURJTE104 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURJTE104 needs to address all 33 unit components: 4 elements with 16 performance criteria, 1 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURJTE104?
Auditori pulls the current release of AURJTE104 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURJTE104 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURJTE104 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURJTE104, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURJTE104 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURJTE104 free