AUMGTY003 — Modify and repair chassis and frames
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AUMGTY003 must cover
31 assessable components: 3 elements (9 performance criteria), 9 performance evidence and 7 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Inspect vehicle
- 1.1Inspection activities are carried out according to workplace procedures
- 1.2Chassis or frame is measured and inspected to determine modification or repair requirements
- 1.3Inspection report and work plan are prepared during inspection
2 Modify, repair and align chassis or components
- 2.1Vehicle specifications are identified and interpreted according to original equipment manufacturer (OEM) specifications and regulatory requirements
- 2.2Tools and equipment are selected and checked for correct operation, and identified faults reported
- 2.3Chassis or frame is modified or repaired and then aligned according to job sheet and work order
3 Complete work processes
- 3.1Completed work is checked against job sheet and OEM specifications
- 3.2Work areas, tools and equipment are cleaned and stored according to workplace procedures
- 3.3Work forms and final inspection reports are completed and submitted to appropriate personnel
Performance evidence
- Before competency can be determined, individuals must have competently modified and repaired a chassis and frame on a minimum of one occasion.
- follow workplace procedures and work health and safety (WHS) requirements when modifying and repairing chassis and frames
- maintain a working knowledge of vehicle chassis and components
- identify faults and non-conformance of vehicle components and systems against original equipment manufacturer (OEM) specifications
- modify and repair chassis and frame components, which must include cutting and joining as well as straightening the chassis
- identify workplace quality standards relating to modifying and repairing chassis and frames
- use workplace equipment when modifying and repairing chassis and frames
- follow safe work practices when modifying and repairing chassis and frames
- complete repair and inspection reports relating to modified and repaired chassis and frames
Knowledge evidence
- WHS requirements and workplace procedures relating to modifying and repairing chassis and frames
- workplace documentation relating to modified and repaired chassis and frames: OEM specifications, Vehicle Standards Bulletin 6 (VSB6) National Code of Practice – Heavy Vehicle Modifications, inspection and testing procedures, work instructions, fault indicators, retesting and release processes, work plans
- types of vehicle chassis and frames
- inspection and measuring techniques of chassis and frames
- chassis and frame alignment techniques
- modification and repair requirements of chassis and frames
- cutting and welding procedures of chassis and frames
Foundation skills
- Reading skills: interpret job requirements from work plan and OEM specifications; interpret inspection reports and job sheets.
- Writing skills: legibly prepare work plans; complete final inspection reports.
- Numeracy skills: identify component part numbers and amounts; interpret measurements from OEM specifications; identify and set equipment.
- Planning and organising skills: select and prepare equipment, materials and work area; complete job within required timelines.
- Self-management skills: take responsibility for organising work role and priorities.
- Technology skills: use chassis or frame measuring systems; use induction heating equipment.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AUMGTY003
What does an assessment tool for AUMGTY003 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AUMGTY003 needs to address all 31 unit components: 3 elements with 9 performance criteria, 9 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AUMGTY003?
Auditori pulls the current release of AUMGTY003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AUMGTY003 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AUMGTY003 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AUMGTY003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AUMGTY003 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AUMGTY003 free