AUMGTS001 — Prepare materials for fabrication using jigs and fixtures
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AUMGTS001 must cover
35 assessable components: 5 elements (15 performance criteria), 8 performance evidence and 8 knowledge evidence requirements, plus 4 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare
- 1.1Hand tools, equipment and resources are selected and inspected, and faults are repaired or reported
- 1.2Appropriate lifting equipment is selected and used according to workplace procedures
- 1.3Work information and working drawings are identified and confirmed
2 Select and mark out materials
- 2.1Work health and safety (WHS) requirements and workplace procedures are identified and followed
- 2.2Materials are selected, marked out and prepared according to job specifications
- 2.3Defective materials are set aside for scrap or rework
3 Load and unload materials onto jig or fixture
- 3.1Material and parts are positioned and secured in jig to prevent movement
- 3.2Materials and parts are loaded and unloaded into jig according to WHS requirements and workplace procedures
4 Fabricate parts
- 4.1Materials are shaped to fit jig and checked against job specifications
- 4.2Materials positioned in jig are bolted or welded according to job specification
- 4.3Fabrication process is completed according to workplace procedures
- 4.4Fabricated components are removed from jig and checked for compliance, and faulty components are returned for rework
5 Complete work processes
- 5.1Work area, jigs, tools and equipment are cleaned, maintained and inspected according to workplace procedures
- 5.2Faulty equipment is identified, tagged and reported
- 4.3Work sheets and production schedule are completed and given to appropriate personnel
Performance evidence
- identify and apply job information and specifications
- interpret drawings and material lists
- identify and select materials for fabrication according to job specifications
- fix materials in jig or fixture according to workplace procedures and work health and safety (WHS) requirements
- fabricate common automotive components using jigs and fixtures according to workplace procedures and WHS requirements
- maintain a clean and safe work area
- apply manual-handling techniques with jigs and fixtures, and their associated materials
- complete workplace documentation relating to preparing materials for fabrication using jigs and fixtures
Knowledge evidence
- WHS requirements relating to preparing materials for fabrication using jigs and fixtures
- methods of interpreting fabrication requirements from drawings and material lists
- procedures for preparing materials for fabrication using jigs and fixtures
- types of fabrication tools and equipment and their application and operation
- types and use of jigs and fixtures
- fabrication processes using jigs and fixtures of common automotive components
- common automotive manufacturing parts and assembly faults
- handling and storage procedures for automotive manufacturing materials
Foundation skills
- Reading skills to:: interpret workplace procedures, WHS requirements, workplace quality standards, job instructions and working drawings identify installation sequence.
- Writing skills to:: complete production schedule documentation prepare work plan complete machine maintenance forms complete faulty equipment tags.
- Numeracy skills to:: count parts and components to be placed into jig select and arrange correct size and amount of required fasteners identify and adjust welder machine settings.
- Planning and organising skills to:: plan and assemble parts into jigs or fixtures complete job to specification and timeline.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AUMGTS001
What does an assessment tool for AUMGTS001 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AUMGTS001 needs to address all 35 unit components: 5 elements with 15 performance criteria, 8 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AUMGTS001?
Auditori pulls the current release of AUMGTS001 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AUMGTS001 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AUMGTS001 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AUMGTS001, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AUMGTS001 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AUMGTS001 free